Happy Trails Products Happy Trails Center Stand V Strom 650 ALL YEARS

More Views

Happy Trails Center Stand V Strom 650 ALL YEARS

100 % of 100
Happy Trails Centerstand
Suzuki DL650 V-Strom
Special Price $221.45 Regular Price $260.53
Happy Trails Products

Building on the success of our KLR650 centerstands, Happy Trails is pleased to introduce a centerstand for another of our favorite adventure bikes, the V-Strom 650 (DL650). Thanks to a well thought-out geometry and non-slip tread, it is very easy to place the motorcycle safely on its stand in all situations: for chain maintenance, for fuel filling, for baggage transport or for winter storage.

Our centerstand is:

  • Steady
  • Stable
  • Simple to operate
Footkick is reinforced by a gusset .
Unlike most centerstands that utilize rubber exhaust mounts or suspension components to extend and retract, Happy Trails centerstands are uniquely engineered to extend and retract using it's own built in stops, this allows fitment for many years of particular models.    

 It is finished to a perfect fit and easy to install.  All Happy Trails centerstands are  powder coated for a long lasting life. The stand comes complete with all hardware required for a perfect fit.

Customer Product Review

Ground Clearance Note: Installation of the centerstand reduces overall ground clearance by about 1.5" unless you have a skid plate (which already reduces clearance by about that same amount). However, the foot kick is tight and close to the swingarm so cornering clearance isn't reduced. Riders will hit their pegs or panniers before contacting the centerstand.

V-Strom 1000 Note: this product is not compatible with the V-Strom 1000 and we are not planning on making a stand for that unit.

Lowered bikes: The centerstand will not work on lowered V-Strom 650's.


  • DL650XT Adventure: The centerstand is compatible with the DL650XT Adventure and the Touratech skid plate.
  • Happy Trails Skid Plate and center-stand are compatible
  • 2012 + : Full Yoshimira exhaust system will not work with centerstand.

Important Installation Note: It is essential that the customer read the instructions carefully and follow them precisely for a successful installation. This is especially true for the positioning of the spacers. Without proper installation customers have complained of over-rotating and leaning. Following the instructions assures a great fit for a great product.

All Happy Trails products are crafted in Idaho


More Information
Manufacturer SKU HTP7-5-16
California Restricted Product: No
Manufacturer: Happy Trails Products
Write Your Own Review
You're reviewing:Happy Trails Center Stand V Strom 650 ALL YEARS
Your Rating

Product Faqs

Ask a Question

Ask a Question

Sort by   
  • Will this work on a 2015 Wee with a Givi skid plate?
    Question by: Jim Burr on 2019-02-21 21:23:00

    Yes it will work with the Givi.

    Answer by: Tim on 2019-02-21 16:23:00
  • Will this fit a 2006 650 Vstrom? What would I be looking at for shipping to shipping to Canada B4e 2g5. Thanks
    Question by: Josh on 2018-08-13 19:02:00

    Yes the center stand will work on your 2006 V Strom.

    When you put the item in the Shopping Cart you can get your freight options at that time.

    Answer by: Tim on 2018-08-13 15:02:00
  • With happy trails center stand. Will it fit a 2017 V-Strom 650 standard base modal.
    Question by: James on 2018-05-09 23:52:00

    Yes the center stand will fit. It can be found HERE

    Answer by: Tim on 2018-05-09 19:52:00
  • Hello, I have suzuki v strom dl 650 2008.i want to buy a center stand... I live in Israel. Do you make ship to israel? If yes, how much it's cost? Thanks.
    Question by: Eran Avraham on 2017-10-06 00:28:00

    When you put the item in the cart you can get a freight quote at that time.

    Answer by: Tim on 2017-10-05 20:28:00
  • Does ur center stand fit a 2016 DL650. I ask because up to 2011 the stopper when the stand is up is built into the exhaust in the form of a U shape brakect welded to the exhaust with a rubber pad for noise. In 2012 that bracket on the exhaust is no longer there , is now on the left side of the bike mounted on to the center stand mounting bolts. Thank u. I have had several vs 650 and had that problem when installing an 09 stand model year on to a 13 model year
    Question by: Jose arencibia on 2017-03-30 01:10:00

    Sorry for the late reply I thought I had answered this. We have our own stop so the year is not critical to us.

    Answer by: Tim on 2017-03-29 21:10:00
  • I noticed this is welded at only one point where many of the other designs have reinforced the "foot" lever. I like the clean look but am interested in why your design choice.
    Question by: Robert Anderson on 2017-03-13 03:32:00

    We do have a gusset that is not shown in the picture.

    Answer by: Tim on 2017-03-12 23:32:00
  • Will this fit the 2016 V-Strom 650? Other sites list stands that fit up through 2015 which makes me think they made a change to the frame for the 2016 bike...???
    Question by: Christopher Strunk on 2017-03-10 23:23:00

    We can't speak for others, our listing is correct for our product.

    Answer by: Tim on 2017-03-10 18:23:00
  • Dose this center stand competible with Suzuki DL650 2012?
    Question by: Amit on 2017-01-16 21:35:00

    The center stand fits all years of the DL650.

    Answer by: Tim on 2017-01-16 16:35:00
  • Is this stand compatible with a Givi Trekker fender mounted on a 2014 V-strom 650?
    Question by: Stan on 2016-09-26 21:30:00

    We can't see where it will interfere.

    Answer by: Tim on 2016-09-26 17:30:00
  • I have a 2012 650 Vstrom that's been lowered but I'm planning to put the factory links back on. I have a Weld86 bash plate. Will your center stand work with this arrangement?
    Question by: Dave on 2016-07-19 05:25:00

    We can't review every skid plate to make sure they are comapatible. The best suggestion I have is to review our instructions and make a dtermination. If you do buy and there is an issue we will refunded the full purchace price.

    Answer by: Tim on 2016-07-19 01:25:00
  • Will I be able to install these if I have SW-MOTECH crashbars and skid plate installed?I have the 2005 dl650 k5
    Question by: Teal on 2016-07-08 01:29:00

    The center stand will work fine.

    Answer by: Tim on 2016-07-07 21:29:00
  • I have a 2008 dl1000 Vstrom. Would this fit my application?
    Question by: Jamil on 2016-06-27 23:50:00

    V-Strom 1000 Note: this product is not compatible with the V-Strom 1000 and we are not planning on making a stand for that unit.

    Answer by: Tim on 2016-06-27 19:50:00
  • I need center stand for dl 650 v-strom adventure 2013.Does this stand fit for that year.Thanks
    Question by: Aleksandar Radisavljevic on 2016-04-13 00:57:00

    Compatibility: DL650XT Adventure: The centerstand is compatible with the DL650XT Adventure.

    Answer by: Tim on 2016-04-12 20:57:00
  • It says in the installation guide that this center stand for a Suzuki V Strom 650 is not intended to be a ride off stand. Is that correct?
    Question by: Chris Shore on 2016-04-06 20:32:00

    We did not intend the center stand to be something that someone would jump on the bike, dump clutch and launch off of the cneter stand.

    So for safety sake we put the disclaimer on to ensure the side stand is nested correctly and a safe start would be accomplished.

    Answer by: Tim on 2016-04-06 16:32:00
  • I have a 2009 V-strom DL650. You say that you manf. the center stand. If I told you that I had the bike lowered one and one-half inches, couldn't you manf. a stand to fit?
    Question by: Randall Hazen on 2016-03-26 02:06:00

    We have done a lowered stand for the KLR and it was quite complex to do. We quit offering it for the KLR for anything over an inch due to dragging issues.

    We would not be able to simply lower the stand.

    Answer by: Tim on 2016-03-25 22:06:00
  • Hello. Most sites sell a year specific stand which cuts off at 2012 and above or 2011 and below. This stand says all years so please does this fit both a 2007 and a 2012 V strom 650?Thank youBrian
    Question by: brian on 2016-03-03 00:19:00

    We make our stand here in Boise Idaho so we can control the tolerances. All the other stands are imported so they can't make the changes needed.

    Answer by: Tim on 2016-03-02 19:19:00