0 item(s) - $0.00
You have no items in your shopping cart.


More Views

Happy Trails Highway Pegs

SKU: HTP0-0-4

Quick Overview

Happy Trails highway peg

Ask a question (10)


These highway pegs are made from one-inch lightweight steel base tube. They are designed to fit to the front of the Adventure MotoStuff Skid Plate or the Happy Trails Skid Plates.

Compatible With:

  • DR650SE 1996+
  • Suzuki DL650
  • Suzuki DL1000 (Early Models)
  • BMW F650GS Single/Dakar
  • BMW G650GS/Sertao


The pegs come with mounting hardware and may require drilling. Color is black powder coat.

Dimensions: The bar is 17" long, then a 1" per side joint/hinge, and the total length with pegs extended is 26".

There are 2 sets of holes that are predrilled in the tube; 2.5" cc & 4" cc (+ or -)

Replacement Pegs:

The easiest way to identify what replacement peg you need is to look at how the peg is attached to the foot peg bar. If a 6mm attaches the peg through a clevis the EG3 Replacement Foot Pegs is what you need. If the peg has a 10MM bolt attaching it to a tab on the foot peg bar it would be the EG4 Replacement Foot Pegs.

All Happy Trails products are crafted in Idaho



Product Faqs

Ask a Question

  • Are you able to fold the pegs up out of the way so they don't interfere or get snapped off when going off road?

    The Pegs will fold up.

    How much this was helpful

  • Will this work with a GIVI skid plate .

    We offer them for our skid plate which is .188 (3/16) thick and I believe the Givi is made out a much lighter material. Othere than that it should work.

    How much this was helpful

  • I have ordered the Enduro Guardian skid plate and and am wondering if this bar and pegs are compatible. If so, would I have to do any drilling? Thanks. Ken


    We don't know the specs on that skid plate. Most likely you will have to drill to make them work. Our suggestion is a min of 3/16 skid plate material and a flat surface.

    Care must be taken so they will not interfrer with cornering of the bike also. 

    Send us a picuture and we can comment more

    [email protected]

    How much this was helpful

  • Will these bars work with a sw motech skid plate?

    We mount to our skid plate and other skid plates that are 3/16" thick. The surface needs to be flat.

    If you have the integrity of strength and a flat surface you are good.

    If the skid plate is a riveted and  pop can thickness I would pass.

    How much this was helpful

  • What is the spacing between the bolt holes?

    There are 2 sets of holes that are predrilled in the tube; 2.5" cc & 4" cc (+ or -)

    How much this was helpful

  • Will these work on a JNS Engineering skid plate for DR650?

    No idea what that kid plate looks like or what it is made of, so we can't say if it will fit.

    How much this was helpful

  • I am looking for a skid plate and highway pegs for a new 2015 V-STom 650 XT. This bike will come with the factory crash bars and I need a skid plate and highway pegs that will be compatible with them. Will your skid plate and pegs interfere with the bars or vice versa?Greg

    They all are compatible.

    How much this was helpful

  • I have bought a Dakar in the Uk. Have a picture of it but cant tell what model the bash plate is. If i sent you a pic would you be able to tell me whether the pegs would fit?

    End the Picture to [email protected] and we will get it checked out.

    How much this was helpful

  • Will this work on a stock 2015 650 vstrom?

    The Peg bolts to a Skid Plate.

    How much this was helpful

  • Is there someway to make these work with a 2018 650 XT with the factory plastic skid plate. Could they be adapted? Thanks a lot.

    You have to have a base with integrity to mount the Peg to. The plastic would not have that integrity.

    How much this was helpful

© 2015 All Rights Reserved.