Happy Trails Highway Pegs

Happy Trails highway peg
$50.00
SKU
HTP0-0-4

These highway pegs are made from one-inch lightweight steel base tube. They are designed to fit to the front of the Adventure MotoStuff Skid Plate or the Happy Trails Skid Plates.

Compatible With:

  • DR650SE 1996+
  • Suzuki DL650
  • Suzuki DL1000 (Early Models)
  • BMW F650GS Single/Dakar
  • BMW G650GS/Sertao

 

The pegs come with mounting hardware and may require drilling. Color is black powder coat.

Dimensions: The bar is 17" long, then a 1" per side joint/hinge, and the total length with pegs extended is 26".

There are 2 sets of holes that are predrilled in the tube; 2.5" cc & 4" cc (+ or -)

Replacement Pegs:

The easiest way to identify what replacement peg you need is to look at how the peg is attached to the foot peg bar. If a 6mm attaches the peg through a clevis the EG3 Replacement Foot Pegs is what you need. If the peg has a 10MM bolt attaching it to a tab on the foot peg bar it would be the EG4 Replacement Foot Pegs.

All Happy Trails products are crafted in Idaho

    INSTRUCTIONS
 

Write Your Own Review
You're reviewing:Happy Trails Highway Pegs

Product Faqs

Ask a Question







Ask a Question


Sort by   
  • Will this work on a stock 2015 650 vstrom?
    Question by: Peter on 2018-04-05 02:55:00

    The Peg bolts to a Skid Plate.

    Answer by: Tim on 2018-04-04 22:55:00
  • I have bought a Dakar in the Uk. Have a picture of it but cant tell what model the bash plate is. If i sent you a pic would you be able to tell me whether the pegs would fit?
    Question by: Pat M Deavoll on 2018-01-29 08:07:00

    End the Picture to [email protected] and we will get it checked out.

    Answer by: Tim on 2018-01-29 03:07:00
  • I am looking for a skid plate and highway pegs for a new 2015 V-STom 650 XT. This bike will come with the factory crash bars and I need a skid plate and highway pegs that will be compatible with them. Will your skid plate and pegs interfere with the bars or vice versa?Greg
    Question by: Greg on 2017-06-21 04:37:00

    They all are compatible.

    Answer by: Tim on 2017-06-21 00:37:00
  • I have ordered the Enduro Guardian skid plate and and am wondering if this bar and pegs are compatible. If so, would I have to do any drilling? Thanks. Ken
    Question by: ken on 2017-03-15 20:26:00

    Ken,

    We don't know the specs on that skid plate. Most likely you will have to drill to make them work. Our suggestion is a min of 3/16 skid plate material and a flat surface.

    Care must be taken so they will not interfrer with cornering of the bike also. 

    Send us a picuture and we can comment more

    [email protected]ppy-trail.com

    Answer by: Tim on 2017-03-15 16:26:00
  • Will these work on a JNS Engineering skid plate for DR650?
    Question by: Adam on 2017-03-13 22:07:00

    No idea what that kid plate looks like or what it is made of, so we can't say if it will fit.

    Answer by: Tim on 2017-03-13 18:07:00
  • Will this work with a GIVI skid plate .
    Question by: Al Wiebe on 2017-03-01 01:04:00

    We offer them for our skid plate which is .188 (3/16) thick and I believe the Givi is made out a much lighter material. Othere than that it should work.

    Answer by: Tim on 2017-02-28 20:04:00
  • What is the spacing between the bolt holes?
    Question by: Daven Heikkinen on 2017-02-06 21:24:00

    There are 2 sets of holes that are predrilled in the tube; 2.5" cc & 4" cc (+ or -)

    Answer by: Tim on 2017-02-06 16:24:00
  • Are you able to fold the pegs up out of the way so they don't interfere or get snapped off when going off road?
    Question by: Joe on 2017-01-21 00:47:00

    The Pegs will fold up.

    Answer by: Tim on 2017-01-20 19:47:00
  • Hi just wondering if these pegs are pretty versatile and can be mounted on a majority of bikes I have a dr650 and also do you ship to Victoria, Australia. post code (3687) and if so how much would I be looking at all up delivered to my door? Cheers thanks for your time and help Brett
    Question by: brett on 2016-09-05 19:25:00

    Brett

    These Pegs will work on the DR650.

    To get a freight quote you can put the items in your cart and enter your shipping information. This is what I came up with.

    United States Postal Service

    Federal Express

    Answer by: Tim on 2016-09-05 15:25:00
  • Does the bar come with mounting holes? If so, what is the distance from the center of the bar to the center of the two holes? And if so, can I order with no mounting holes or will you drill them where I need them to be placed?Thanks
    Question by: gary on 2016-06-22 23:02:00

    The are 2 sets of holes that are approximately 4" & 2.5" center to center. This means that spacing between the holes is this dimension.

    We don't offer a non drilled version.

    We can drill holes on a completed peg, the charge that shop charges us is $25.00.

    Answer by: Tim on 2016-06-22 19:02:00
  • Will these bars work with a sw motech skid plate?
    Question by: Nick houghton on 2016-04-08 03:15:00

    We mount to our skid plate and other skid plates that are 3/16" thick. The surface needs to be flat.

    If you have the integrity of strength and a flat surface you are good.

    If the skid plate is a riveted and  pop can thickness I would pass.

    Answer by: Tim on 2016-04-07 23:15:00
  • Could your highway pegs be attached to the lower crossbar of the OEM crash bars on a 2015 Vstrom 650 Adventure? Perhaps simply using U clamps?
    Question by: Tom Gravenish on 2016-04-07 01:25:00

    Could you email [email protected] so I can send you some pictures.

    Answer by: Tim on 2016-04-06 21:25:00
  • Will this Happy Trails Highway PegsDL650-1000SKU: HTP0-0-4 work with the Happy Trails Skid Plate G650GS/F650GS SingleSKU: HTP1-3-88-B
    Question by: Martin on 2016-02-15 21:28:00

    They will bolt up to the skid plate,  this might require drilling new holes.

    The BEWARE issue is that you mount them in a way that you will not drag them in a corner.

    They are universal so you need to make sure they are mounted in such a way they will not have an adverse effect on you.

    Answer by: Tim on 2016-02-15 16:28:00