570 cams are bolt-in cams for 1999-'06 engines. Cams that exceed the limits of the stock valve springs require the use of special high lift springs. Most S&S cams have higher lift than stock and are designed to take advantage of the extra flow of ported stock heads or S&S Super Stock® heads. Due to the high lift of these cams, S&S adjustable pushrods are recommended. Not all grinds are available in the chain drive version. To get the best performance from a performance cam installation, a high flow intake and exhaust system is also recommended.
Key Features
Brand Manufactured by S&S Cycle
Category Engine Components
Type Camshafts
Specifications
Length 11.63 in
Width 9.13 in
Height 4.75 in
Weight 3.85 lbs
Rider Benefits
570 cams are bolt-in cams for 1999-'06 engines. Cams that exceed the limits of the stock valve springs require the use of special high lift springs. Most S&S cams have higher lift than stock and are designed to take advantage of the extra flow of ported stock heads or S&S Super Stock® heads. Due to the high lift of these cams, S&S adjustable pushrods are recommended. Not all grinds are available in the chain drive version. To get the best performance from a performance cam installation, a high flow intake and exhaust system is also recommended.
Designed for 88 to 96 CID engines with compression ratios between 9:1 and 10:1 this cam will provide a nice power increase across the entire power band, 3200-5700 rpm
2005-'06 can use stock valve springs while 1999-'04 will need special valve springs
Quick installation and Easy Start® Cams allow stock starter to start any engine
Please review manufacturer details to ensure proper fitment before ordering.