hidden
Support (800) 444-8770 Email: [email protected]
S&S Cycle 36-84 BT 3-7/16in x Up To 4-3/4in Stroke LC Piston Set - .030in - 920-0079
SSC Cylinder & Piston Kits by S&S Cycle
- Category: Engine Components.
- Type: Piston Sets - Powersports.
$595.95
USD
SKU
ssc920-0079
Manufacturer:
S&S Cycle
SSC Cylinder & Piston Kits
These 3-7/16" .0310" bore, low compression stroker pistons are part of an S&S stock bore stroker kit for 1936-'84 HD® big twins, and are designed to be used in conjunction with S&S® stroker flywheels. Flywheels of the following strokes may be used for the following displacements: 4-1/2" stroke - 84" @ 7.3:1 compression 4-5/8" stroke - 86" @ 8.0:1 compression 4-3/4" stroke - 88" @ 9.0:1 compression These pistons are normally used in stock HD® cylinders, and must be purchased separately, based on the required piston oversize. The modern alloys used in these pistons, coupled with the advanced skirt profiles, allow them to be fit tighter resulting in low engine noise and long engine life. In the past, this could only be achieved with weaker cast pistons. Cylinders are available from S&S® for 1941-'47 and 1966-'84 models. S&S® offers machine shop services through the S&S® Service and Speed Center. New pistons can be fit to your existing cylinders for a reasonable charge.
Key Features
Brand
Manufactured by S&S Cycle
Manufactured by S&S Cycle
Category
Engine Components
Engine Components
Type
Piston Sets - Powersports
Piston Sets - Powersports
Specifications
Length
1 in
1 in
Width
1 in
1 in
Height
1 in
1 in
Weight
1 lbs
1 lbs
Rider Benefits
These 3-7/16" .0310" bore, low compression stroker pistons are part of an S&S stock bore stroker kit for 1936-'84 HD® big twins, and are designed to be used in conjunction with S&S® stroker flywheels. Flywheels of the following strokes may be used for the following displacements: 4-1/2" stroke - 84" @ 7.3:1 compression 4-5/8" stroke - 86" @ 8.0:1 compression 4-3/4" stroke - 88" @ 9.0:1 compression These pistons are normally used in stock HD® cylinders, and must be purchased separately, based on the required piston oversize. The modern alloys used in these pistons, coupled with the advanced skirt profiles, allow them to be fit tighter resulting in low engine noise and long engine life. In the past, this could only be achieved with weaker cast pistons. Cylinders are available from S&S® for 1941-'47 and 1966-'84 models. S&S® offers machine shop services through the S&S® Service and Speed Center. New pistons can be fit to your existing cylinders for a reasonable charge.
Please review manufacturer details to ensure proper fitment before ordering.
| Manufacturer SKU | 920-0079 |
|---|---|
| Manufacturer: | S&S Cycle |
| Department | PAM-T14 |
| HTP Sale | No |
| Show Stock | Yes |
| California Restricted Product: | No |
Write Your Own Review