hidden
Support (800) 444-8770 Email: [email protected]
PRP Seats Seat Mount Adapter Kit for 2024+ RZR XP1000 and XPEDITION (Pair) - C89
PRP Powersport UTV Seat Mounts by PRP Seats
- Category: Seats.
- Type: Seat Brackets & Frames.
$209.99
USD
SKU
prpC89
Manufacturer:
PRP Seats
PRP Powersport UTV Seat Mounts
PRP's Seat Mounts for Polaris RZR XP 1000 and XPEDITION allow you to install our favorite PRP seats into your vehicle. So you can add more comfort and containment to your ride. These mounts are designed to adapt the stock seat slider rails to the bottom of a PRP UTV Seat, allowing you to maintain full adjustability. We also included longer slots on the mounts which allow you to adjust the seat as far back as possible. Sold as a kit to fit a pair of seats. Detailed Features of the C89 Adapter: Unmatched Durability: Made from steel that's 3/16" thick, it's designed to endure rough rides without bending or breaking. This means you can enjoy your off-road adventures without worrying about the adapter. Precision Fit: The adapter comes with elongated slots, providing a range of adjustability that ensures a precise fit for your seat. So you can adjust the seat as far back as possible. All-Weather Coating: We've coated the adapter with a layer of powder that not only resists rust but also shrugs off mud, water, and sun, keeping your adapter looking as good as new for years. Effortless Installation: The adapter features pre-drilled holes sized at 5/16", making it ready to bolt on. The supplied hardware allows you to attach two of the adapter brackets to the bottom of each seat, and then to the stock seat slider. Fitment: 2024+ Polaris RZR XP 1000, 2024+ Polaris RZR XP4 1000 (Front & Rear), 2024+ RZR XPEDITION (Front Only) *Does not fit 2015-2023 RZR XP 900, XP 1000, Turbo, Turbo S, RS1 (that have a plastic seat base). Does not fit RZR PRO XP, PRO R, Turbo R. These Mounts only fits 2024+ RZR XP 1000, and XPEDITION (that have a metal seat base/slider). *Rear Seats will be 3" Shorter Front to Back to allow more leg room *Only compatible with PRP UTV Seats that have a Flat Strap Mount on the bottom of the seat frame. Kit Includes: (4x) of the Adapter Brackets (16x) ¼” x 20 x 1” Hex bolts (16x) ¼” Flat Washers (8x) ¼” x 20 x 1” Nylock Nuts
Key Features
Brand
Manufactured by PRP Seats
Manufactured by PRP Seats
Category
Seats
Seats
Type
Seat Brackets & Frames
Seat Brackets & Frames
Specifications
Length
21.9 in
21.9 in
Width
6.8 in
6.8 in
Height
6.2 in
6.2 in
Weight
10.8 lbs
10.8 lbs
Rider Benefits
PRP's Seat Mounts for Polaris RZR XP 1000 and XPEDITION allow you to install our favorite PRP seats into your vehicle. So you can add more comfort and containment to your ride. These mounts are designed to adapt the stock seat slider rails to the bottom of a PRP UTV Seat, allowing you to maintain full adjustability. We also included longer slots on the mounts which allow you to adjust the seat as far back as possible. Sold as a kit to fit a pair of seats. Detailed Features of the C89 Adapter: Unmatched Durability: Made from steel that's 3/16" thick, it's designed to endure rough rides without bending or breaking. This means you can enjoy your off-road adventures without worrying about the adapter. Precision Fit: The adapter comes with elongated slots, providing a range of adjustability that ensures a precise fit for your seat. So you can adjust the seat as far back as possible. All-Weather Coating: We've coated the adapter with a layer of powder that not only resists rust but also shrugs off mud, water, and sun, keeping your adapter looking as good as new for years. Effortless Installation: The adapter features pre-drilled holes sized at 5/16", making it ready to bolt on. The supplied hardware allows you to attach two of the adapter brackets to the bottom of each seat, and then to the stock seat slider. Fitment: 2024+ Polaris RZR XP 1000, 2024+ Polaris RZR XP4 1000 (Front & Rear), 2024+ RZR XPEDITION (Front Only) *Does not fit 2015-2023 RZR XP 900, XP 1000, Turbo, Turbo S, RS1 (that have a plastic seat base). Does not fit RZR PRO XP, PRO R, Turbo R. These Mounts only fits 2024+ RZR XP 1000, and XPEDITION (that have a metal seat base/slider). *Rear Seats will be 3" Shorter Front to Back to allow more leg room *Only compatible with PRP UTV Seats that have a Flat Strap Mount on the bottom of the seat frame. Kit Includes: (4x) of the Adapter Brackets (16x) ¼” x 20 x 1” Hex bolts (16x) ¼” Flat Washers (8x) ¼” x 20 x 1” Nylock Nuts
EZ-Install - Pre-drilled to fit all standard width PRP suspension seats
Notes
- This product may require Prop 65 acknowledgement for California orders.
Please review manufacturer details to ensure proper fitment before ordering.
| Manufacturer SKU | C89 |
|---|---|
| Manufacturer: | PRP Seats |
| Department | PAM-T14 |
| HTP Sale | No |
| Show Stock | Yes |
| California Restricted Product: | Yes |
Write Your Own Review