hidden
Support (800) 444-8770 Email: [email protected]
PRP Seats Kawasaki KRX 35pc Tool Kit (Tools Only) - H116
PRP Powersport Tool Bag by PRP Seats
- Category: Exterior Styling.
- Type: Tool Storage.
$209.99
USD
SKU
prpH116
Manufacturer:
PRP Seats
PRP Powersport Tool Bag
PRP's Kawasaki KRX Tool Kit provides everything you need to fix your Kawasaki Teryx KRX or KRX4 out on the trail. This 35 piece kit includes a selection of high-quality ratchets, sockets, wrenches, extension bars, pliers, and a ball peen hammer (for when things get really fun). We've hand picked the exact tools that are needed most when working on a KRX - So you have only the essentials that you really need, without adding the extra weight of an entire tool box. Below we have listed all the tools included, along with a handy guide to the most common uses for each tool. Each tool also includes a Limited Lifetime Warranty. This Kit includes Tools only. Designed to fit into PRP'S Roll Up Tool Bag. (Bag sold seperately or in our Combo Kit) Fitment: Kawasaki Teryx KRX & Kawasaki Teryx KRX4 KIT INCLUDES: ALLEN Sockets 4mmx3/8 - Skid plate, rock guards 5mmx3/8 - Parking brake, fenders 6mmx3/8 - Transmission drain 8mmx3/8 - Front diff drain, brake caliper TORX BITS- Sockets T40x3/8 - Brake lines SOCKETS/WRENCHES 8mmx3/8 - Front diff, sensors 10mmx3/8 - CVT cover, trailing-arm guards, exhaust, electrical grounds, taillights, door latch, front brake lines, radiator 10mm End Wrench 12mmx3/8 - Front diff, parking brake, exhaust, fender braces, brake lines, seat mount, tilt wheel, CVT 12mm End Wrench 13mmx3/8 - Tilt wheel 14mmx3/8 - Brake caliper, motor mount, spark plug, bead locks, front sway bar 14mm End Wrench 15mmx3/8 - Rear bumper 15mm End Wrench 17mmx3/8 - Deep Socket Lug nuts, radius rods, shocks, sway bar, frame, A-arms, tie-rods, trailing arms, oil drain 17mm End Wrench 19mmx1/2 - Deep socket Ball joints, aftermarket lug nuts 23mmx1/2 - Tie-rods 24mmx1/2 deep socket - drive clutch 27mmx1/2 - Front axle nut, diff/trans fill 36mmx1/2 - Front/Rear axle nut EXTRAS Phillips Screwdriver: Brake lines, door panels, shock guards, firewall Flat Screwdriver - Hose clamps Needle nose Pliers - Cotter pins, remove belt parts Channel Lock Diagonal cutter - Remove Belt Par
Key Features
Brand
Manufactured by PRP Seats
Manufactured by PRP Seats
Category
Exterior Styling
Exterior Styling
Type
Tool Storage
Tool Storage
Specifications
Length
18 in
18 in
Width
12 in
12 in
Height
6 in
6 in
Weight
14 lbs
14 lbs
Installation
Refer to the manufacturer�s instructions for proper installation.
Rider Benefits
PRP's Kawasaki KRX Tool Kit provides everything you need to fix your Kawasaki Teryx KRX or KRX4 out on the trail. This 35 piece kit includes a selection of high-quality ratchets, sockets, wrenches, extension bars, pliers, and a ball peen hammer (for when things get really fun). We've hand picked the exact tools that are needed most when working on a KRX - So you have only the essentials that you really need, without adding the extra weight of an entire tool box. Below we have listed all the tools included, along with a handy guide to the most common uses for each tool. Each tool also includes a Limited Lifetime Warranty. This Kit includes Tools only. Designed to fit into PRP'S Roll Up Tool Bag. (Bag sold seperately or in our Combo Kit) Fitment: Kawasaki Teryx KRX & Kawasaki Teryx KRX4 KIT INCLUDES: ALLEN Sockets 4mmx3/8 - Skid plate, rock guards 5mmx3/8 - Parking brake, fenders 6mmx3/8 - Transmission drain 8mmx3/8 - Front diff drain, brake caliper TORX BITS- Sockets T40x3/8 - Brake lines SOCKETS/WRENCHES 8mmx3/8 - Front diff, sensors 10mmx3/8 - CVT cover, trailing-arm guards, exhaust, electrical grounds, taillights, door latch, front brake lines, radiator 10mm End Wrench 12mmx3/8 - Front diff, parking brake, exhaust, fender braces, brake lines, seat mount, tilt wheel, CVT 12mm End Wrench 13mmx3/8 - Tilt wheel 14mmx3/8 - Brake caliper, motor mount, spark plug, bead locks, front sway bar 14mm End Wrench 15mmx3/8 - Rear bumper 15mm End Wrench 17mmx3/8 - Deep Socket Lug nuts, radius rods, shocks, sway bar, frame, A-arms, tie-rods, trailing arms, oil drain 17mm End Wrench 19mmx1/2 - Deep socket Ball joints, aftermarket lug nuts 23mmx1/2 - Tie-rods 24mmx1/2 deep socket - drive clutch 27mmx1/2 - Front axle nut, diff/trans fill 36mmx1/2 - Front/Rear axle nut EXTRAS Phillips Screwdriver: Brake lines, door panels, shock guards, firewall Flat Screwdriver - Hose clamps Needle nose Pliers - Cotter pins, remove belt parts Channel Lock Diagonal cutter - Remove Belt Par
Notes
- This product may require Prop 65 acknowledgement for California orders.
Please review manufacturer details to ensure proper fitment before ordering.
| Manufacturer SKU | H116 |
|---|---|
| Manufacturer: | PRP Seats |
| Department | PAM-T14 |
| HTP Sale | No |
| Show Stock | Yes |
| California Restricted Product: | Yes |
Write Your Own Review