hidden
Support (800) 444-8770 Email: [email protected]
PRP Seats Front Seat Mounts for Polaris RZR Pro XP, Turbo R (2 Door) - Pair - C71
PRP Powersport UTV Seat Mounts by PRP Seats
- Category: Seats.
- Type: Seat Brackets & Frames.
$104.99
USD
SKU
prpC71
Manufacturer:
PRP Seats
PRP Powersport UTV Seat Mounts
Our Polaris RZR PRO XP, PRO R, PRO S, Turbo R Front Seat Mounts Kit allows you to install PRP seats into your vehicle. The mounts are designed to adapt the stock PRO XP seat slider, to the bottom of a PRP UTV Seat. These fixed adapters provide a more secure and solid base than the stock plastic release clips. These are better than our Quick Release Mounts if your are going to be racing off-road, or doing hard riding that would likely cause those plastic release clips to break. The adapter mounts re-use the stock bolts/nuts to connect to the vehicle, then we have included hardware to connect the adapter mounts to the seats. They provide a little more legroom than stock seats, and has more headroom. Be aware that these mounts are hard mounted, so they do take a little more work to access the battery or air filter. Sold as a kit to fit a pair of seats. Works with Click 6 Harnesses (with minor adjustments on 2 door passenger seat). The 2 Door and 4 Door PRO XP's, PRO R's, PRO S's and Turbo R's actually have different mounting set-ups (2 Door - the passenger seat is fixed, while the driver seat can slide / 4 Door - both seats can slide). So we offer different adapter mounts depending on which vehicle you have: C71 - Pro XP 2 Door Front Seat Mount Kit (Pair) C72 - Pro XP 4 Door Front Seat Mount Kit (Pair) Fitment: 2020+ Polaris RZR PRO XP, PRO R, PRO S, Turbo R *Fits any PRP UTV Seats with flat strap frames (will not work with RZR 1000 seat frames). Ride Measurements vs Stock Seat Legroom - Back of the Seat to Steering Wheel Stock - 19" C71/C72 Bolt-In Mount - 20.25" (More Legroom than stock) C79 Quick Release Mount - 18.5" (Little Less Legroom than stock) Headroom - Bottom of Seat to Stock Cage Stock - 44.5" C71/C72 Bolt-In Mount - 45.25" (More Headroom than stock) C79 Quick Release Mount - 43" (Little Less Headroom than stock)
Key Features
Brand
Manufactured by PRP Seats
Manufactured by PRP Seats
Category
Seats
Seats
Type
Seat Brackets & Frames
Seat Brackets & Frames
Specifications
Length
20 in
20 in
Width
6 in
6 in
Height
6 in
6 in
Weight
20 lbs
20 lbs
Installation
Refer to the manufacturer?s instructions for proper installation.
Rider Benefits
Our Polaris RZR PRO XP, PRO R, PRO S, Turbo R Front Seat Mounts Kit allows you to install PRP seats into your vehicle. The mounts are designed to adapt the stock PRO XP seat slider, to the bottom of a PRP UTV Seat. These fixed adapters provide a more secure and solid base than the stock plastic release clips. These are better than our Quick Release Mounts if your are going to be racing off-road, or doing hard riding that would likely cause those plastic release clips to break. The adapter mounts re-use the stock bolts/nuts to connect to the vehicle, then we have included hardware to connect the adapter mounts to the seats. They provide a little more legroom than stock seats, and has more headroom. Be aware that these mounts are hard mounted, so they do take a little more work to access the battery or air filter. Sold as a kit to fit a pair of seats. Works with Click 6 Harnesses (with minor adjustments on 2 door passenger seat). The 2 Door and 4 Door PRO XP's, PRO R's, PRO S's and Turbo R's actually have different mounting set-ups (2 Door - the passenger seat is fixed, while the driver seat can slide / 4 Door - both seats can slide). So we offer different adapter mounts depending on which vehicle you have: C71 - Pro XP 2 Door Front Seat Mount Kit (Pair) C72 - Pro XP 4 Door Front Seat Mount Kit (Pair) Fitment: 2020+ Polaris RZR PRO XP, PRO R, PRO S, Turbo R *Fits any PRP UTV Seats with flat strap frames (will not work with RZR 1000 seat frames). Ride Measurements vs Stock Seat Legroom - Back of the Seat to Steering Wheel Stock - 19" C71/C72 Bolt-In Mount - 20.25" (More Legroom than stock) C79 Quick Release Mount - 18.5" (Little Less Legroom than stock) Headroom - Bottom of Seat to Stock Cage Stock - 44.5" C71/C72 Bolt-In Mount - 45.25" (More Headroom than stock) C79 Quick Release Mount - 43" (Little Less Headroom than stock)
OnyxCoated - Protected with black powdercoat to prevent deterioration
Notes
- This product may require Prop 65 acknowledgement for California orders.
Please review manufacturer details to ensure proper fitment before ordering.
| Manufacturer SKU | C71 |
|---|---|
| Manufacturer: | PRP Seats |
| Department | PAM-T14 |
| HTP Sale | No |
| Show Stock | Yes |
| California Restricted Product: | Yes |
Write Your Own Review