hidden
Support (800) 444-8770 Email: [email protected]
K&N Engineering Engine Air Intake and Air Box Kit - 63-1144
KN UTV Air Intake Systems by K&N Engineering
- Category: Air Intake Systems.
- Type: Cold Air Intakes.
$499.99
USD
SKU
knn63-1144
Manufacturer:
K&N Engineering
KN UTV Air Intake Systems
This K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. This air intake comes with a K&N high-flow air filter which is protected from the elements with an enclosed filter housing. Air is directed through a custom-molded intake tube into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter is washable and reusable. This air intake is relatively easy to install usually in 90 minutes or less. The tools needed are two torx screwdrivers (T30 and T15), a flat blade screwdriver, a wrench, and a ratchet set.
Key Features
Brand
Manufactured by K&N Engineering
Manufactured by K&N Engineering
Category
Air Intake Systems
Air Intake Systems
Type
Cold Air Intakes
Cold Air Intakes
Specifications
Length
24.1 in
24.1 in
Width
15.5 in
15.5 in
Height
14.5 in
14.5 in
Weight
6.2 lbs
6.2 lbs
Installation
Refer to the manufacturer?s instructions for proper installation.
Rider Benefits
This K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. This air intake comes with a K&N high-flow air filter which is protected from the elements with an enclosed filter housing. Air is directed through a custom-molded intake tube into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter is washable and reusable. This air intake is relatively easy to install usually in 90 minutes or less. The tools needed are two torx screwdrivers (T30 and T15), a flat blade screwdriver, a wrench, and a ratchet set.
Use 25-5167 Extreme duty Precleaner wrap or RU-5064DK Drycharger wrap for extended service interval of air filter
Sealed air box design separates air filter from heat and dirt
Free-flowing High-Density Polyethylene intake tube
Notes
- This product may require Prop 65 acknowledgement for California orders.
Please review manufacturer details to ensure proper fitment before ordering.
| Manufacturer SKU | 63-1144 |
|---|---|
| Manufacturer: | K&N Engineering |
| Department | PAM-T14 |
| HTP Sale | No |
| Show Stock | Yes |
| California Restricted Product: | Yes |
Write Your Own Review