Happy Trails SU Side Rack<br>Yamaha WR250R

Happy Trails SU Side Rack
Yamaha WR250R
Special Price $237.15 Regular Price $279.00
SKU
HTP9-4-1.1T


Single Cap-It! Pannier Top Bag straps into SU utility carrier so you can leave panniers at camp and carry tools, tubes on the trail. This bag is not waterproof, and requires a plastic bag inside. Note: If you have a pair of Cap-It Pannier Top Bags you can use one of them. This is the same bag.

The SU (Structurally Unique) Rack is designed for use with soft or fixed luggage of almost any type. Perfect for mounting aluminum panniers, Pelican cases or any soft luggage you choose. Currently not suitable for GIVI side cases.

The WR250R SU rack has our new Point1 pressed insert design. This adds to the ease and functionality you???ve come to expect from our pannier systems. Details HERE.

Features:

  • Exclusive and thoroughly tested 4th generation side racks
  • Four point mounting system (includes mounting hardware)
  • Strong 5/8" round tubing for the arms and 3/4" square tubing for SU loop
  • Bumper support between the two side racks adds strength, stability and protection
  • Racks improve the structural integrity of the rear sub-frame adding protection for the bike in case of tipovers.
  • Tool Tray Base in weled in on left side
  • Symmetrical racks

 

Note: SU kit does not include the Top Plate shown in the photos. Available separately.

Bike specific rack means no compromise as with universal type racks. Each and every rack is fabricated by our expert craftsmen to take advantage of the existing structural points and design of the individual bike.

Unmatched strength. No one makes a stronger rack and no one offers a better warranty. Our racks are built to take it ... anywhere ... anytime ... in any conditions. True adventure touring racks. When your trip depends on it accept no substitute.

WR250R width with SU installed - 17.75"
Finish
: black powder coat paint only

Weight: 11.5 pounds

Note 1: Does not include the tail rack shown in the photo.

 

All Happy Trails products are crafted in Boise, Idaho

INSTALL INSTRUCTIONS

Write Your Own Review
You're reviewing:Happy Trails SU Side Rack<br>Yamaha WR250R

Product Faqs

Ask a Question







Ask a Question


Sort by   
  • Hello, what is the diameter of the tubing that you use to make these racks, and how much does the plate at the top interfere with near 360degree "clamping"? Is the plate flush with the inside, or the outside of the rack tubing? I'm wondering if I can use a set of Ortlieb panniers that I already own from bicycle touring with your rack (https://ortliebusa.com/product/back-roller-classic-pair/)The attachment works as such:https://www.youtube.com/watch?v=zCay7Aq5NJYThank you
    Question by: Khai on 2017-10-06 03:45:00

    The bicycle bags will not work with our racks.

    Answer by: Tim on 2017-10-05 23:45:00
  • I have a chance to buy a second hand Happy Trail SU rack locally but it only includes the 3 main pieces- left, right and bumper. How much to buy the mounting hardware from you ?
    Question by: James O'Leary on 2017-10-06 00:02:00

    The Bolt Kit is $16.00.

    You can go on the web and opent the instructions to get all the details on the hardware.

    Answer by: Tim on 2017-10-05 20:02:00
  • Can a fuel tank such as Rotopax be attached behind one side rack? You should sell an upgrade, if not.
    Question by: MIKE REYNEN on 2016-10-11 20:03:00

    We have not put a fuel can inside the WR but we have done an XT250. Check these pictures out.

    Answer by: Tim on 2016-10-11 16:03:00
  • How heavy is the SU rack? I see that the SL rack is 9 lbs., but the weight doesn't seem to be mentioned for the SU rack.
    Question by: Robert Swier on 2016-09-21 02:55:00

    The web has been updated.

    Answer by: Tim on 2016-09-20 22:55:00
  • I am buying a 2016 WR250R and will be purchasing your rack system. I have a pair of Caribou Commando Bags and want to know if you sell an adapter kit. Thank you.
    Question by: Stephen Garrison on 2016-07-23 18:11:00

    Our HTPMK750.1 mount kit is what you use for this application.

    Answer by: Tim on 2016-07-23 14:11:00
  • Do you offer a rear stabilizer bar that is more tucked in? I see that the current back bar accommodates the stock tail light housing. I am planning on doing a tail tidy, and am wondering if there is a back bar that will be fitted with that in mind. The current back bar juts out a lot if a tail tidy has been done.
    Question by: Mark on 2016-07-06 19:21:00

    We can make you one if you send us a drawing of what you want. Price would be $75.00 plus freight.

    Answer by: Tim on 2016-07-06 15:21:00
  • I would like to be able to mount my GIVI E-41's. If I am willing to drill and mount the GIVI hardware, can I make this adaption? If not, what is the cost for your GIVI adaptor solution?
    Question by: rob parker on 2016-04-08 03:10:00

    Here is the link to the Happy trails Givi Adaper Plates

    http://www.happy-trail.com/givi-su-rack-adapter.html

    Answer by: Tim on 2016-04-07 23:10:00