SU Rack Inner Utility/Tool/Carrier System

SU Rack Inner Utility/Tool/Carrier System
$0.00
SKU
HTP0-0-25.X

Select your style of SU rack below. If you're not sure which kind of rack you have see PHOTOS.There are 3 different version of this inner tool rack available, for the 3 different versions of racks.

Option 1: Non point 1 inner tool rack
Option 2: You have a upper plate welded in (Point1) but no lower inner tool plate.
Option 3: I have a "Point1" plate and welded in inner tool mount ("T" style rack) on the left side rack.


Single Cap-It! Pannier Top Bag straps into SU utility carrier so you can leave panniers at camp and carry tools, tubes on the trail. This bag is not waterproof, and requires a plastic bag inside. Note: If you have a pair of Cap-It Pannier Top Bags you can use one of them. This is the same bag.


The SU Racks in the chart below have the welded in Inner Tool Tray Base Plate

inner tool tray chart

We've been making our popular SU rack in one version or another for over 20+ years. There is no stronger luggage side rack anywhere. The SU rack is unbeatable for carrying any kind of luggage and especially excels at being the center point of our aluminum pannier systems.

Many of us have developed a style of riding that includes offloading luggage at a point of destination and then riding without the panniers for day trips. But what happens when the carefully developed tool kit, tire inflation kit, and spare tubes are left back at camp or at home? Nothing good.

Jason and his team in the fabrication shop came up with a solution. It's this nifty SU inner tool kit/utility shelf carrier that allows a rider to load the inner space of symmetrical SU racks with the can't-leave-behind essentials, while leaving the panniers back at camp.

The two or three piece kits are an easy installation to an existing SU rack.  For the older style racks three holes are drilled (6mm or 1/4" bit not included) using one of the plates as a template. The two remaining pieces form a secure shelf with an adjustable width of 2.5" to 3.75".  The current  "T" style SU Racks (see chart above) have the piece kits.Perfect for a tool roll or secure bag for carrying must-have items for field repairs.

Additional pictures show the shelf with optional Pannier Bag. In the video below, Tim Bernard explains the Inner Tool Kit beginning at 0:40.

 



All Happy Trails products are crafted in Boise, Idaho

INSTALL INSTRUCTIONS

Save

Write Your Own Review
You're reviewing:SU Rack Inner Utility/Tool/Carrier System

Product Faqs

Ask a Question




Ask a Question


Sort by   
  • Do the SU racks for an xt250 allow for mounting of Rotopax on the inside of the racks? If so which tool rack plate would I need?
    Question by: Tony Coyle on 2019-01-21 22:58:00

    You would use the Rotopax Mount HERE

    For more pictures click HERE!

    Answer by: Tim on 2019-01-21 17:58:00
  • Will this work with a rotopax on a tw200?
    Question by: Bryan on 2018-10-22 03:50:00

    Yes it will work on the TW200

    Answer by: Tim on 2018-10-21 23:50:00
  • Do you have the non-point 1 SU rack (HTP0-0.25) available for the Versys X 300? A large tail rack for the X 300? The non-point 1 SU rack (HTP0-0.25) available for the Kawasaki Super Sherpa?Jerry
    Question by: Jerry Collins on 2018-02-22 00:24:00

    We just have the Point 1 Su Rack & the SL Rack for Versys 300.

    No large Tail rack.

    Just the Point 1 for the Sherpa.

    Give Tim a call 800-444-8770 x106 for any help you might need

    Answer by: Tim on 2018-02-21 19:24:00
  • Please clarify for me - I have an '01 f 650gs Dakar (single). Will this fit?
    Question by: Bill on 2017-01-18 19:35:00

    With the dual exhaust there is no room to put anything inside the SU Rack. The Inner Tool Tray will not work on the F650GS.

    Answer by: Tim on 2017-01-18 14:35:00
  • Will a 1 gallon rotopax fit between the rack and bike. I have a 2014 klr 650, would like it to be on the left side. Thanks
    Question by: Jeffery Blodgett jr on 2017-01-12 21:23:00

    When we redesigned the KLR E Model SU we duscussed widening the SU Rack for a Rootpax to fit on the inside of the SU. With our 30 years ex[erince of riding and working on KLR we came to the conclusion that the KLR had a dequate fuel capacity and the need would be minimal. The IMS 10 gallon tank would be an option if more fuel is needed on the KLR.

    Answer by: Tim on 2017-01-12 16:23:00