HT Skid Plate <br>BMW R1200GS | GSA

BMW R1200GS & GSA  Skid Plate 2005 to 2012

$249.95
SKU
HTP1-12-88-B

Don't risk catastrophic damage to your R1200. We have also seen what happens when the stock skid plate comes in contact with too many large, unmovable trail hazards. In the worst case (since the stock plate is mounted to the engine oil pan) the mounting bolts punch a hole in the engine causing oil loss ... and an unhappy rider. In less severe cases, the rubber mounts holding the skid plate to the bottom of the engine soon separate from each other and you have a skid plate left on the trail somewhere, or maybe caught in time to zip-tie it in place until you get to the next BMW dealer.

Our Happy Trails skid plate solves these problems with our custom fit, full length 3/16 inch skid plate. It is not mounted to the engine oil pan and does not use failure prone rubber based mounting spacers. We mount directly to the frame rails at the rear and to the most substantial engine mount available at the front of the plate. Our unique bracket design absorbs the energy from larger hits before transferring it to the engine case.

Features:

  • Unique mounting brackets help prevent engine case damage and potential "Ride Endin" oil loss

  • Extended protection for the front, sides, and back of the engine and exhaust system

  • Adventure proven 3/16 inch aluminum plate is used throughout for strength and long term durability

Includes:

  • Skid Plate

  • Mounting Brackets and Hardware

  • Installation Instructions

Dimensions: 15" x 24" x 3.25"
Weight: 4.5 lbs
Color and Finish: Black Hammertone Powder Coat

All Happy Trails Products are designed and crafted in Boise, Idaho

INSTALL INSTRUCTIONS

Write Your Own Review
You're reviewing:HT Skid Plate <br>BMW R1200GS | GSA

Product Faqs

Ask a Question







Ask a Question


Sort by   
  • DOES THIS SKID PLATE FIT A 2007 R1200GS?
    Question by: TODD on 2016-10-21 20:35:00

    The HTP1-12-88 Skid Plate fits the R1200GS and the R1200GSA.

    Answer by: Tim on 2016-10-21 16:35:00
  • hello, could you please confirm if this skid plate will fit on a r1200gsa triple black 2012 oil cooled ?
    Question by: enrique on 2016-08-08 17:47:00

    The HTP1-12-88 is the correct skid plate for the 2012 oil cooled BMW.

    Answer by: Tim on 2016-08-08 13:47:00
  • Just for oil head or will it fit 2016 R1200GSA? Thanks.
    Question by: JOHN on 2016-07-11 17:11:00

    The 2013 GS plus and the 2014 GSA plus take this skid palte

    Answer by: Tim on 2016-07-11 13:11:00
  • Any chance I could get this plate in raw aluminum?
    Question by: Dennis Eggers on 2016-05-07 02:28:00

    Yes there is a chance you can if you call in Monday and ask for Tara @ ext 102

    800-444-8770

    We are just sending or just send 2 to powder caot. If we can't get those we can build you one.

    Answer by: Tim on 2016-05-06 22:28:00