Happy Trails Products Happy Trails SU Side Rack G650GS F650GS Single  Dakar Sertao

More Views

Happy Trails SU Side Rack G650GS F650GS Single Dakar Sertao

90 % of 100

Dimensions: The SU rack loop is 12 1/8" long by 9" tall.

Wondering about the difference between our SU and SL racks? See a comparison on the Happy-Trail WIKI.

  All SU Racks can be made GIVI ready ...

If you intend to run GIVI luggage side cases you need our GIVI Adapter Plate.See Photo. Each kit contains everything you need to mount two GIVI Monokey cases.

Happy Trails Products

Special Price $249.95 Regular Price $249.95

1 x Happy Trails SU Side Rack G650GS F650GS Single Dakar Sertao   + $249.95

Special Price $249.95 Regular Price $249.95

Quality USA Products: Your adventure is our goal! Every single Happy Trails part is hand made and quality checked right here in the USA to guarantee the highest quality products for your adventure.

The SU (Structurally Unique) Rack is designed for use with soft or fixed luggage of any type. Perfect for mounting aluminum panniers, GIVI luggage, Pelican cases or any luggage you choose.

The G650GS-F650GS Single & F650GS Dakar SU rack has our new Point1 pressed insert design. Details HERE.  Our quick change pannier system gives owners options when planning their ride. Riders may prefer large capacity hard luggage for longer multi-day trips, but then want to switch to smaller soft bags for their daily commute to the office. Or simply remove the luggage when there is no need to carry extra items. Our unique mounting system allows such switches to be made in only a minute or two.


  • Exclusive and thoroughly tested 4th generation side racks
  • Four point mounting system (includes mounting hardware)
  • Strong 5/8" round tubing for the arms and 3/4" square tubing for SU loop
  • Bumper support between the two side racks adds strength, stability and protection
  • Racks improve the structural integrity of the rear sub-frame adding protection for the bike in case of tipovers.

Bike specific rack means no compromise as with universal type racks. Each and every rack is fabricated by our expert craftsmen to take advantage of the existing structural points and design of the individual bike.

Unmatched strength. No one makes a stronger rack and no one offers a better warranty. Our racks are built to take it ... anywhere ... anytime ... in any conditions. True adventure touring racks. When your trip depends on it accept no substitute.

Included: Left and right SU rack, rear support bumper, bolt kit, and installation instructions

Dimensions: Installed Width: 21.75" (side-to-side)
Weight: 10.2 lbs (including bolt kit)
Color: Black Hammertone powder Coat

Compatible with the GIVI SR685 Top Case Mount

All Happy Trails products are crafted in Boise, Idaho



More Information
Manufacturer SKU HTP1-3-1.1-KIT
California Restricted Product: No
Quality USA Products

Quality USA Products: Your adventure is our goal! Every single Happy Trails part is hand made and quality checked right here in the USA to guarantee the highest quality products for your adventure.

Manufacturer: Happy Trails Products
Write Your Own Review
You're reviewing:Happy Trails SU Side Rack G650GS F650GS Single Dakar Sertao
Your Rating

Product Faqs

Ask a Question

Ask a Question

Sort by   
  • Is there a top rack that can work with these as well?
    Question by: Natia on 2017-06-21 04:24:00

    Check this out  

    Answer by: Tim on 2017-06-21 00:24:00
  • Can I take my pannier off this rack without having to unpack it to reach the bolts? Or does it just bolt from the inside of my case to the rack?
    Question by: Matt Kuhn on 2017-06-19 22:58:00

    You just need to undo the top bolts or knobs.

    Answer by: Tim on 2017-06-19 18:58:00
  • hello. I have a givi sr685 top case rack for my 2012 bmw g650gs sertao.After looking at the instructions for the su rack, it appears they will use the same brakelamp located mounting holes already used by my sr685.i would like to buy the su racks, side rotpax mounts and the rotopax products, but i sure would not like to find out first that it is compatible with my givi toprack mount.i have over $600 invested in my givi rack and outback trekker case, so replacing those is not a current option.could i source longer bolts or any other ideas?with gratitude,richard geil
    Question by: richard on 2017-03-21 23:52:00


    It has been a battle for years over that mounting area. Out Top Plate does not use that area and that is how we get away with running both.

    You could use our top plate and transfer the Givi holes into our plate and use the hardware.

    I can give you a discount on both items to help you out.

    I will send you a eperate email 

    Answer by: Tim on 2017-03-21 19:52:00
  • I bought these racks for my 2003 BMW F650GS dakar and they work great! However I'm getting a 2013 f700gs and would like to know if these racks would fit my new cycle? The dimensions are the same but it's hard to tell from the picture if they are the same. I've only been able to use my racks on one short trip and would like to be able to use them some more.
    Question by: KATHY ZACH on 2016-08-15 19:38:00

    The 03 single cylinder is a copletely fifferent bike than the current twin cylinder, the SU Racks are not interchangeable.

    Answer by: Tim on 2016-08-15 15:38:00
  • Will Givi Outback series panniers fit on the SU racks?http://www.giviusa.com/givi-products/cases/outback-series/obk37bpack2-37-ltr-outback-pair-black-detail
    Question by: mike b on 2016-08-09 22:29:00

    The Outback does not fit anyones racks but Givi.

    Answer by: Tim on 2016-08-09 18:29:00
  • Are these racks compatible with the Givi top-box mount that bolts into the same top-side mount points as the flat tabs on the top of the SU loops? Motorcycle is a 2001 BMW F650GS. I don't have the Givi part numbers, but it looks similar to this: http://www.giviusa.com/my-motorcycle/bmw/f650gs-f800gs-08-14/sra5103-aluminum-plate-detailThanks in advance!-Lancer!!
    Question by: Lancer!! on 2016-08-09 22:07:00

    Our instuctions show that this should not be a conflict. The plate you referenced is for the BMW Twin.

    If you are referring to the GIVI 639F there could be an issue.

    You might need to use our HTP1-3-7 Tail Plate

    Answer by: Tim on 2016-08-09 18:07:00
  • What is the weight limit for these side racks?
    Question by: Tristan on 2016-07-12 18:27:00

    What are you trying to accomplish?

    Is there a specific item you want to carry?

    Please email me at [email protected]

    Answer by: Tim on 2016-07-12 14:27:00
  • Hi I have pannier cases from my old 2007 klr and id like to mount them on my 2007 dl1000. But on the dl1000 I have SW-motech evo sidetracks. do yo make a conversion kit?
    Question by: Christopher Coray on 2015-12-27 23:24:00

    To Mount Happy Trails Pannier to SWM Rack you would use the HTPMK625A and choose SWM kit Option. Here is the link:


    Answer by: Tim on 2015-12-27 18:24:00