hidden
Support (800) 444-8770 - Email: [email protected]
Currency
EG4 Engine Guard/Highway Peg Kawasaki KLR650 All Years
Protect the engine of your KLR650 and add comfort at the same time.
2022 KLR - The EG4 does fit the 2022 KLR
- The stock gravel deflector will have to be eliminated.
- The Happy Trails Skid Plate will work with the EG4
- The Happy Trail Upper and Lower engine guards will not work with the EG4
- If you have engine guards that bolt up to the front engine mount the EG4 will not work with them.
SW Motech Note: The EG4 is compatible with the SW Motech skid plate but not compatible with the SW Motech crash bars.
If you have engine guards that bolt up to the front engine mount the EG4 will not work with them.
$139.80
SKU
HTP4-1-4
Manufacturer:
Happy Trails Products
Our exclusive fourth generation engine guard-highway peg combination (EG-4) for the KLR650. The EG-4's one inch steel base tube adds additional support and the highway pegs give the rider many more choices in riding positions for greater comfort mile after mile. The highway pegs provide bonus protection for the engine side cases, and they easily fold-up when not in use.
We build the EG-4 as light as possible with the strength KLR rider's need. Side case protection comes from the one inch steel base tube and the top plate is a custom 1/8" steel plate that is ben at ninety degree angle and weld on the one tub for additinal strength. The metal plate helps keep small sharp rocks from cutting away at water hoses and electrical wires and also offers protection from roosted rocks. Unlike other engine guards that transfer the impact to the engine case, the EG-4 is built to take punishment. The new bolt-on foot peg design provides you with the option to mount other pegs. It is also possible to ride without a peg if you would prefer.
Color: Black powder coat only
Important Note: On the E series KLR650 (08+ and later) the EG-4 combination is not compatible with the stock plastic skid plate. The stock plate must be set aside when installing. For this reason and to maximum your protection package you may wish to select our custom skid plate in either black anodized or bright anodized aluminum.
SW Motech Note: The EG4 is compatible with the SW Motech skid plate but not compatible with the SW Motech crash bars.
Includes: EG-4, hardware and bolt-on footpegs.
Width Dimensions:
- The width of the EG4 is (without pegs) 19 3/4"
- The width of the peg is 1" .....21 3/4" overall
- The peg extened is 4 1/2".... 28 3/4" overall
All Happy Trails products are crafted in Idaho
| Manufacturer SKU | HTP4-1-4 |
|---|---|
| California Restricted Product: | No |
| Quality USA Products |
|
| Manufacturer: | Happy Trails Products |
Write Your Own Review
Product Faqs
-
I have a ‘12 KLR 650 with SW Motech Crashbars and Skidplate. Will your Highway pegs fit?Thanks, BobbyQuestion by: Bobby Brookshire on 2018-12-18 22:05:00
The Pegs mount in the same place, so they will not work together.
Answer by: Tim on 2018-12-18 17:05:00 -
Any special installation considerations when going on a 2014 with a Tougher Than Hell Skid Plate already installed?Question by: Vhortykho on 2018-10-08 19:40:00
The EG4 Highway Peg and the TTH Skid Plate are designed to work together.
Answer by: Tim on 2018-10-08 15:40:00 -
Are these compatible with tusk crash guards.Question by: Nathan Johnson on 2018-08-15 19:37:00
Both part bolt up in the same place so they are not compatable.
If you have a skid plate you can use our universal highway peg found HERE
Answer by: Tim on 2018-08-15 15:37:00 -
What are the 2 round circular looking bolts holes on either side for? Light mounts? I bought this, works great, just wondering. Thanks.Question by: Steve CLutter on 2017-05-03 20:21:00
The "SPUDS" that are welded on are the attaching points for the PDNerf Bars that are the upper protection.
Answer by: Tim on 2017-05-03 16:21:00 -
I have 2015 klr 650. Will the eg4 engine guard work with the stock skid plateQuestion by: Matt kreifels on 2017-05-01 16:49:00
No they are not compatible.
There are details on our instructions that show intererence with the "Bat Wings" that are the mounts for the stock wind deflector. Some customers say they have made it work but we recomend installing a skid plate to protect your investment.
Answer by: Tim on 2017-05-01 12:49:00 -
Is this footpeg combo compatable with the richocet skid plate?Question by: Mark Buehler on 2017-04-13 23:31:00
Ues they are compatible.
Answer by: Tim on 2017-04-13 19:31:00 -
Is this comparable with dirtracks full crash barsQuestion by: Steven Hasty on 2017-04-01 20:43:00
Check out our detailed instal instuctions and you can see if there is any interference on your bike
Answer by: Tim on 2017-04-01 16:43:00 -
What is the overall width of the crashbar?pegs up?pegs down?Question by: Michael Heumiller on 2017-01-06 05:58:00
The width of the EG4 is 19 3/4"
The width of the peg is 1" .....21 3/4" overall
The peg extened is 4 1/2".... 28 3/4" overall
Answer by: Tim on 2017-01-06 00:58:00 -
"top loop of 3/4" steel"? I don't see any top loop of 3/4" steel, other than what look like two short mounting bosses. Is this a description of an older model? Also, you have two unanswered questions. Did they both just come in tonight, or are you guys just really bad at customer service? I like the concept of your item, but not sure about you guys. Also, no reviews on this thing?Question by: herb berg on 2016-09-30 01:41:00
We appreciate you catching our error the description has been updated.
Concerning the two questions, they have been answered many moons ago!!!!
Click on the triangle and it shows the answer.
I hope this helps answers you questions and gives you confidence in us.
There is another way to view the questions and I will give that a try. This method puts the last question on the bottom, you still have to click on the triangles to see the other questions.
Answer by: Tim on 2016-09-29 21:41:00 -
I need to know if this will work with a Tusk crash bars engine guard on my 2016 KLR650.2428Question by: Ken on 2016-09-13 01:59:00
It does not appear that they will work.
Answer by: Tim on 2016-09-12 21:59:00 -
Can i run the eg4 and htp4 engine gaurd and skid plate with a dirtracks engine gaurdQuestion by: craig altoft on 2016-09-12 19:54:00
-
I lost the right foot peg.Do you sell the foot peg by itself?Thank youQuestion by: josue on 2016-05-16 22:51:00
Here is the link
http://www.happy-trail.com/54-70200-folding-foot-peg.html
54-70200 EMGO PAIR (EG4 Replacement)
SKU: MCY54-70200
Answer by: Tim on 2016-05-16 18:51:00 -
Hello, I have a 2015 and want to run the safari or IMS tank. Will these guards with the highway pegs fit with either of those?Thank youBryanQuestion by: Bryan on 2016-02-27 01:55:00
We have put the IMS Tanks on with these.
Important Note: On the E series KLR650 (08+ and later) the EG-4 combination is not compatible with the stock plastic skid plate. The stock plate must be set aside when installing. For this reason and to maximum your protection package you may wish to select our custom skid plate in either black anodized or bright anodized aluminum.
Answer by: Tim on 2016-02-26 20:55:00 -
I have an '08 KLR 650 with Givi crash bars. is the EG4 compatible with them or would that require any modifying? also, you list 2 skid plates, can you tell me which one works best with the EG4?Question by: Paul on 2016-01-26 00:02:00
The EG4 is compatible with the GIVI crash bars and any bars that do not connect to the triangle points on the down tube of the frame and motor mounts. The two options we offer in our skid plate is a normal version compatible with all other engine guards except for SWM bar which we offer an SWM skid plate for those specific bars only.
Answer by: Tim on 2016-01-25 19:02:00
Related Products
Check items to add to the cart or
Other Products You Might Be Interested In
