hidden
Support (800) 444-8770 Email: [email protected]
Supertech M8 Helmet - Factory - Blue/Orange/Yellow - Large 8302922-7445-LG
This combination of layers is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management; limited outer shell deflection means the energy spreads wider and is better absorbed by the EPS liner
$529.95
USD
SKU
0110-7400
Manufacturer:
Alpinestars
- Shell construction utilizes a highly advanced molding technology with a multi-composite combination: uni-directional carbon composite with aramid layer that gives significant radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy, and providing critical penetration protection
- This combination of layers is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management; limited outer shell deflection means the energy spreads wider and is better absorbed by the EPS liner
- The Supertech M8 liner construction combines with the shell to offer highly efficient impact energy management
- Formed with a multi-density EPS polymer, the energy absorbing layer gives an inner helmet profile which soaks up forces dissipated over the outer shell at the point of an impact and provides a shape offering a close and comfortable fit
- Four section liner construction allows for specific densities of polymer to be prepared for different zones around the helmet lining improving energy performance, comfort and fit
- A-Head fitting height and angle adjustment system
- Incorporates a system to allow the helmet to be tuned exactly to the rider’s preference for the height and angle at which the helmet sits on the head allowing for ultra-specific set-up that can be adapted for the type of riding and the rider’s preference
- Raise and lower helmet fit and tilt with micro-adjustable pad
- Visor release system ensuring the mounting is held securely in place for riding over extreme terrain and any track conditions
- Visor release system provides the right level of resistance to ensure the visor detaches from the helmet shell if it is subjected to a significant impact regardless of angle
- The Supertech M8 visor release mechanism is conceived to avoid the inherent weaknesses in other types of anchoring systems
- Maintaining shell integrity is vital for safety and with the possibility of multi-directional forces impacting on the visor, separation at the critical point of leading reduces potentially damaging leverage and rotational accelerations that refer injury to the rider’s neck and spine
- The base of the Supertech M8 helmet has been sculpted to give a relief section, where the bottom profile is raised to clear the collarbone (clavicle)
- Energy absorption pad incorporated into the area of the base pad where it sits over the rider’s collarbone
- Energy absorption pad consists of a more flexible compound rubber section which allows deflection when it contacts the clavicle
- Polypropylene chinbar allows for a degree of lateral deflection, further improving impact protection for the collarbones
- Multi-Directional Impact Protection System (MIPS®) incorporated to reduce rotational motion energies that impact the helmet causing damaging gyration force to be transmitted to the brain
- A low friction ‘slip’ layer is incorporated into the Supertech M8 helmet, between the comfort padding layer and the multi-density polymer energy absorption shell. When energy is impacted upon the helmet, causing a rotation force, the MIPS layer allows for movement of the inner absorption layer to damp and re-direct the energy before causing significant acceleration stress to the brain. This mitigates the causes of brain injuries, such as concussion
- Emergency Release System (ERS)
- While the helmet is still on the rider’s head, the side cheek padding can be extracted efficiently and safely to allow ease of removal by trackside support and medical staff
- The Supertech M8 is also designed to allow a helmet ‘Eject’ inflation system to be fitted into the inside crown of the shell
- Along with the ERS padding removal, ‘Eject’ allows for emergency removal of the helmet, without putting load on the rider’s spine
- Chin-strap: Wider than certification requirement: 26 mm for comfort and produced with a woven poly yarn to give a soft ‘hand’ feel that connects securely with a double D-ring
- The material selection, preparation and construction of the helmet has been rigorously analyzed for weight to strength and energy absorption properties and a strict analysis of all the components used in the Supertech M8 finishing
| Manufacturer SKU | 8302922-7445-LG |
|---|---|
| Manufacturer: | Alpinestars |
| Gender | Unisex |
| Age Group | adult |
| Department | PAM-PU |
| Show Stock | Yes |
| Riding Style | ATV, Off-Road, UTV |
| California Restricted Product: | No |
| Color | Orange |
| Size | L |
Write Your Own Review