hidden
Support (800) 444-8770 Email: [email protected]
Conversion Camshaft 216821
Cam grinds listed are designed to be used with stock lifters; they require the installation of a 07-17 cam plate, oil pump, cam sprockets and chains, and both hydraulic chain adjusters (these parts are not included and must be purchased separately)
Special Price
$373.51
Regular Price
$415.95
USD
Only 4 left
SKU
0925-0140
Manufacturer:
Andrews
- Allow you to upgrade your 99-06 Twin Cam (except 06 Dyna Glide) to the newer roller-style cam chains and replaces the spring tension cam chain adjusters with the later-style hydraulic adjusters for longer life
- Cam grinds listed are designed to be used with stock lifters; they require the installation of a 07-17 cam plate, oil pump, cam sprockets and chains, and both hydraulic chain adjusters (these parts are not included and must be purchased separately)
- A list of required components is supplied with each set of cams
- Performance should be similar to earlier bikes with the same cam grinds
- Made in the U.S.A.
- 99-06 Twin Cam motors (except 06 Dyna Glide) cannot use the 07-17 cams, as the bearing journal on the earlier motors is .875" in diameter and the 07-17 cams are 1.000" in diameter. The "N" series of cams feature the .875" bearing journal, yet still accept the new style cam support plate
- 99-01 model motors must use the Andrews rear cam sprocket Drag part #0925-0147. 2002-2006 models must use the stock rear cam sprocket, OEM #25728-06
- Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance
| Manufacturer SKU | 216821 |
|---|---|
| Manufacturer: | Andrews |
| Department | PAM-PU |
| Show Stock | Yes |
| Riding Style | Street |
| California Restricted Product: | No |
Write Your Own Review