hidden
Support (800) 444-8770 Email: [email protected]
Backoff Brake Hold Module 2-1/4x1-5/8-5/8"
- The Brake Hold Module connects to your bike's electronic speed pick-up sensor (will not work with cable driven speedometers); to keep your brake lights on when you release your brakes but are still decelerating
- Mode #1: Emits a visual signal of 3 short light flashes, followed by 1 long light flash (3.5 seconds). The signal automatically repeats itself as long as the brake lights are on
- Mode #2: Emits a visual signal of 5 quick flashes, followed by a steady on light that remains steady as long as the brake lights are on
- 12 volts DC - Maximum Capacity: 10 Amps (normally up to 3 bulbs)!
$69.95
USD
SKU
28-01020
Manufacturer:
SDC
- The Brake Hold Module connects to your bike's electronic speed pick-up sensor (will not work with cable driven speedometers); to keep your brake lights on when you release your brakes but are still decelerating
- Mode #1: Emits a visual signal of 3 short light flashes, followed by 1 long light flash (3.5 seconds). The signal automatically repeats itself as long as the brake lights are on
- Mode #2: Emits a visual signal of 5 quick flashes, followed by a steady on light that remains steady as long as the brake lights are on
- 12 volts DC - Maximum Capacity: 10 Amps (normally up to 3 bulbs)!
- Compact size. - 2-1/4"L x 1-5/8"W x 5/8"H sealed weather resistant heat sink case.
- 1 Year limited warranty
- Your Bike MUST have Electronic Pick-Up Sensor for this module to function
| Manufacturer SKU | 01020 |
|---|---|
| Manufacturer: | SDC |
| Department | PAM-WPS |
| Show Stock | Yes |
| California Restricted Product: | No |
Write Your Own Review