Support (800) 444-8770 - Email: [email protected]
Already have panniers? Here is the puck kit for mounting them on your new SU rack.
Our mount kits make it a cinch to take your panniers on and off your Happy Trails Point1 design SU rack. Note that your SU rack is a Point1 design if it has a pressed insert for the upper mounts.
The kit contains 2 pucks for each pannier (total of 4). The pucks are permanently attached with hex head bolts to the bottom of the panniers, and hold the shear weight of the pannier. The upper two mounts on each pannier are secured via a plastic knob (3/8" bolt) turned into a threaded insert on the SU rack. Large washers on the inside of the pannier spread the load.
MK750.1 mounts cases to Happy-Trail Point1 SU racks with 3/4" (.750" or 19.05 mm) tubing.
MK625.1 mounts cases to Happy-Trail Point1 SU racks built with 5/8" (.625" or 15.875 mm) tubing (5/8" tubing applies only to BMW Oilheads: R11xxGS; R1200GS)
Note: Our puck system now employs hex head bolts instead of allen head's because customers reported issues with the head being stripped.
All Happy Trails products are crafted in Boise, Idaho
|California Restricted Product:||No|
|Quality USA Products||
Quality USA Products: Your adventure is our goal! Every single Happy Trails part is hand made to order and quality checked right here in the USA to guarantee the highest quality products for your adventure.
|Manufacturer:||Happy Trails Products|
Yowill need THIS KIT check your tube size it should be 5/8" so you use the 625 kit. Add the SWM kit in the drop down to make the mounting easier.
They are 8mm by 1.25 pitch.
Choose the 3/4 or 750 option HTPMK750.1 is the part number.
You would the 625 kit. The 625 kit is 5/8" (.625"). I wouls suggest you remove the rubber bumpers.
You will need to determine the OD of your tube; it could be .625", .710' or .750".
One you have done that the Universal Mount Kit is what you would need. I would also suggest including the SWM option. Read these instructions to give you better idea on how to use the mount kit.
The kit works on round or square tubing.