ROX Rox Anti-Vibration Risers 3R-AV2SE for Dual Sport Bikes

More Views

Rox Anti-Vibration Risers 3R-AV2SE for Dual Sport Bikes

Special Price $149.95 Regular Price $162.95

Out of stock

ROX Part Number: 3R-AV2SE

NEW 2" Elite Anti-Vibration Risers 2" Rise x 7/8" stem clamp x 7/8" or 1-1/8" handlebar.

Rox Adjustable Risers are the premier handlebar riser for Adventure Motorcycling, on road and off. Its pivot puts your bars at your preferred position relieving wrist, elbow and shoulder stress.

These versatile risers allow you to clamp a 7/8" diameter handlebar or remove the 7/8" reducers and clamp an 1-1/8" aluminum "fatbar". If you are thinking of going to a fatbar after you bend your stock set this is the riser to go with.

The reducers lock into risers to insure no slippage between components, and have serrated teeth for maximum gripping power on handlebar.

Clear Anodized and use 8mm bolts

Note: Anti-Vibe Risers may interfere with aftermarket large capacity fuel tanks, and some steering stem clamp configurations. Standard Pivoting Risers will not interfere.

Warning: Rox Anti-Vibe Pivoting Risers should not be used with ant-vibe aftermarket stems that have independent handlebar clamps. If stem has a one-piece dog bone style top clamp then it is okay.

These will install directly on the 07 KFX 450 with stock bars, minor re-routing required. Also great for the 07 YFZ 450, longer cables and brake line required. Always check and confirm that your vehicle has adeguate cable and brakeline length before installing any handlebar risers.

More Information
Manufacturer SKU 1R-AV2SE-1
California Restricted Product: No
Manufacturer: ROX
Write Your Own Review
You're reviewing:Rox Anti-Vibration Risers 3R-AV2SE for Dual Sport Bikes
Your Rating

Product Faqs

Ask a Question

Ask a Question

Sort by   
  • D'ya think that some of your anti vibration clamps would for a 1997 Honda Transalp xl600v?
    Question by: David Mark Harris on 2018-10-16 20:36:00

    Sorry for the delayed reponse. we are having some issues with this APP.

    The Rox Anti Vibe Riser would work for you. You might have to reroute some cables.

    Answer by: Tim on 2018-10-16 16:36:00
  • Do you have bar risers for the VERSYS®-X 300?
    Question by: Jerry Collins on 2018-02-20 22:00:00

    I think the stand ard Rox Riser will work, they are HERE


    Answer by: Tim on 2018-02-20 17:00:00
  • I have 2015 Klr stock handlebars, what model Rox anti vibration risers will work with no alterations? Thanks Brian
    Question by: Brian Atkins on 2016-04-27 22:38:00

    The 44-8450 Rox Risers are univeral for 7/8 and 1 1/8 bars.

    With no alerations is the trick question; they will work but you might have to reroute some cable for safety concerns.

    Answer by: Tim on 2016-04-27 18:38:00