If you are ordering a new lid and it does not look like the one pictured you will need to order the set of (4) Happy Loops and Rivets for your other lid....or....order the Footman Loops option for the replacement lid. We will install the footman loops at no charge on your lid.
You can order the Slot Hinge Hardware Kit below: Contains two screws, two nuts and two spacers, one set each for each side of the lid.
This lid fits Imnaha panniers, which are 15" long and 5" wide.
Select options below.
Replacement lid comes pre-drilled, with 4 Happy Loops and cam latch keepers installed as shown. All lids now come standard with lid locks. See Photo. The lid fits Imnaha panniers, which are 15" long and 5" wide.
These lids have our newer Slot Hinge design.
If your panniers have the old style lid you can convert very easily with this new lid. Drill two holes, install two screws and you're done.
How to: Tighten the cam latches to clamp the lid in place. Inside the hinge slot on each side, measure approximately 1-3/8" from the top of the lid and make a mark. Take off the lid, drill one hole on each side with a 3/16" bit, and install the slot hinge screw. That's it.
Ryan Grassley shows how it's done. We have to go on record as saying, "Get goggles, Ryan!"
|California Restricted Product:||No|
|Manufacturer:||Happy Trails Products|