Happy-Trails Pannier Mount Kit HTP MKXXXA

Happy-Trails Pannier Hybrid Mount Kit

For  Luggage & SU racks that use a 4 puck  pannier mounting kit.. The pannier puck mounting kit come in different configuration to fit the tube diameter.

Happy Trails Products


1 x 5/8, .625 or 16MM   + $87.52

Centering kit keeps the pannier moving forward and back. The pucks keep the pannier from moving up and down.


Our mount kits make it a cinch to take your panniers on and off. This kit will also work for Pelican cases or other types of luggage enabling quick and easy detachment.

The kit consists of four pucks for each pannier (total of 8). The bottom 2 pucks on each pannier hold the shear weight of the pannier and are semi-permanently attached with hex head bolts. The upper 2 pucks on each pannier are the clamping force that holds the pannier to the side rack. They are tightened with a knob (hex head bolts also included) ... a quick couple of turns and the puck is loose enough to rotate and turn down to remove the pannier...  no tools needed.

MK625-A mounts cases to any Happy-Trail SU Racks, Northwest or SL racks (or other racks) built with 5/8" (.625" or 15.875 mm) tubing. Note: MK625-A-SWM add-on kit is available below in order to mount cases to the SW-Motech EVO system racks built with .615" flat tubing. This keeps the pannier from moving forward or to the rear. The pucks keep the pannier from up and down.

Happy Trails pucks are compatible with Hepco Becker and SW-Motech EVO system racks. Measure the thickness of the loop on the rack and order according to the guidelines above.

Note: Our puck system now also offers hex head bolts as an alternative to the knobs. 


All Happy Trails products are crafted in Boise, Idaho



More Information
Manufacturer SKU HTPMK625-A-KIT
California Restricted Product: No
Manufacturer: Happy Trails Products
Write Your Own Review
You're reviewing:Happy-Trails Pannier Hybrid Mount Kit
Your Rating

Product Faqs

Ask a Question

Ask a Question

Sort by   
    There are no faqs for this item.