Happy Trails Products Happy Trails Highway Pegs

Happy Trails Highway Pegs

Rating:
100 % of 100

Happy Trails highway peg.

Note: These are universal highway pegs and will not necessarily line up with existing holes on your bike, requiring 2 holes to be drilled in the skid plate. Mounting bolts are included.

$89.95
SKU
HTP0-0-4
Manufacturer:
Happy Trails Products

Quality USA Products: Your adventure is our goal! Every single Happy Trails part is hand made and quality checked right here in the USA to guarantee the highest quality products for your adventure.

These highway pegs are made from one-inch lightweight steel base tube. They are designed to fit to the front of the Adventure MotoStuff Skid Plate or the Happy Trails Skid Plates.

Compatible With:

  • DR650SE 1996+
  • Suzuki DL650
  • Suzuki DL1000 (Early Models)
  • BMW F650GS Single/Dakar
  • BMW G650GS/Sertao

 

The pegs come with mounting hardware and may require drilling. Color is black powder coat.

Dimensions: The bar is 17" long, then a 1" per side joint/hinge, and the total length with pegs extended is 26".

There are 2 sets of holes that are predrilled in the tube; 2.5" cc & 4" cc (+ or -)

Replacement Pegs:

The easiest way to identify what replacement peg you need is to look at how the peg is attached to the foot peg bar. If a 6mm attaches the peg through a clevis the EG3 Replacement Foot Pegs is what you need. If the peg has a 10MM bolt attaching it to a tab on the foot peg bar it would be the EG4 Replacement Foot Pegs.

All Happy Trails products are crafted in Idaho

    INSTRUCTIONS
 

More Information
Manufacturer SKU HTP0-0-4
California Restricted Product: No
Quality USA Products

Quality USA Products: Your adventure is our goal! Every single Happy Trails part is hand made and quality checked right here in the USA to guarantee the highest quality products for your adventure.

Manufacturer: Happy Trails Products
Write Your Own Review
You're reviewing:Happy Trails Highway Pegs
Your Rating

Product Faqs

Ask a Question







Ask a Question


Sort by   
  • Will this work on a stock 2015 650 vstrom?
    Question by: Peter on 2018-04-05 02:55:00

    The Peg bolts to a Skid Plate.

    Answer by: Tim on 2018-04-04 22:55:00
  • I have bought a Dakar in the Uk. Have a picture of it but cant tell what model the bash plate is. If i sent you a pic would you be able to tell me whether the pegs would fit?
    Question by: Pat M Deavoll on 2018-01-29 08:07:00

    End the Picture to [email protected] and we will get it checked out.

    Answer by: Tim on 2018-01-29 03:07:00
  • I am looking for a skid plate and highway pegs for a new 2015 V-STom 650 XT. This bike will come with the factory crash bars and I need a skid plate and highway pegs that will be compatible with them. Will your skid plate and pegs interfere with the bars or vice versa?Greg
    Question by: Greg on 2017-06-21 04:37:00

    They all are compatible.

    Answer by: Tim on 2017-06-21 00:37:00
  • I have ordered the Enduro Guardian skid plate and and am wondering if this bar and pegs are compatible. If so, would I have to do any drilling? Thanks. Ken
    Question by: ken on 2017-03-15 20:26:00

    Ken,

    We don't know the specs on that skid plate. Most likely you will have to drill to make them work. Our suggestion is a min of 3/16 skid plate material and a flat surface.

    Care must be taken so they will not interfrer with cornering of the bike also. 

    Send us a picuture and we can comment more

    [email protected]

    Answer by: Tim on 2017-03-15 16:26:00
  • Will these work on a JNS Engineering skid plate for DR650?
    Question by: Adam on 2017-03-13 22:07:00

    No idea what that kid plate looks like or what it is made of, so we can't say if it will fit.

    Answer by: Tim on 2017-03-13 18:07:00
  • Will this work with a GIVI skid plate .
    Question by: Al Wiebe on 2017-03-01 01:04:00

    We offer them for our skid plate which is .188 (3/16) thick and I believe the Givi is made out a much lighter material. Othere than that it should work.

    Answer by: Tim on 2017-02-28 20:04:00
  • What is the spacing between the bolt holes?
    Question by: Daven Heikkinen on 2017-02-06 21:24:00

    There are 2 sets of holes that are predrilled in the tube; 2.5" cc & 4" cc (+ or -)

    Answer by: Tim on 2017-02-06 16:24:00
  • Are you able to fold the pegs up out of the way so they don't interfere or get snapped off when going off road?
    Question by: Joe on 2017-01-21 00:47:00

    The Pegs will fold up.

    Answer by: Tim on 2017-01-20 19:47:00
  • Hi just wondering if these pegs are pretty versatile and can be mounted on a majority of bikes I have a dr650 and also do you ship to Victoria, Australia. post code (3687) and if so how much would I be looking at all up delivered to my door? Cheers thanks for your time and help Brett
    Question by: brett on 2016-09-05 19:25:00

    Brett

    These Pegs will work on the DR650.

    To get a freight quote you can put the items in your cart and enter your shipping information. This is what I came up with.

    United States Postal Service

    Federal Express

    Answer by: Tim on 2016-09-05 15:25:00
  • Does the bar come with mounting holes? If so, what is the distance from the center of the bar to the center of the two holes? And if so, can I order with no mounting holes or will you drill them where I need them to be placed?Thanks
    Question by: gary on 2016-06-22 23:02:00

    The are 2 sets of holes that are approximately 4" & 2.5" center to center. This means that spacing between the holes is this dimension.

    We don't offer a non drilled version.

    We can drill holes on a completed peg, the charge that shop charges us is $25.00.

    Answer by: Tim on 2016-06-22 19:02:00
  • Will these bars work with a sw motech skid plate?
    Question by: Nick houghton on 2016-04-08 03:15:00

    We mount to our skid plate and other skid plates that are 3/16" thick. The surface needs to be flat.

    If you have the integrity of strength and a flat surface you are good.

    If the skid plate is a riveted and  pop can thickness I would pass.

    Answer by: Tim on 2016-04-07 23:15:00
  • Could your highway pegs be attached to the lower crossbar of the OEM crash bars on a 2015 Vstrom 650 Adventure? Perhaps simply using U clamps?
    Question by: Tom Gravenish on 2016-04-07 01:25:00

    Could you email [email protected] so I can send you some pictures.

    Answer by: Tim on 2016-04-06 21:25:00
  • Will this Happy Trails Highway PegsDL650-1000SKU: HTP0-0-4 work with the Happy Trails Skid Plate G650GS/F650GS SingleSKU: HTP1-3-88-B
    Question by: Martin on 2016-02-15 21:28:00

    They will bolt up to the skid plate,  this might require drilling new holes.

    The BEWARE issue is that you mount them in a way that you will not drag them in a corner.

    They are universal so you need to make sure they are mounted in such a way they will not have an adverse effect on you.

    Answer by: Tim on 2016-02-15 16:28:00