The Happy Trails Centerstand reflects two-years of research and development. Our goal was to design & produce a product that would be best in class for the following criteria:
We think we've succeeded on all counts.
Answers to questions you've asked:
The sidestand and centerstand must be deployed in a certain order to avoid interference. When dismounting, set the sidestand first ... next deploy the centerstand. Reverse this order when preparing to ride.
The product works with all skid plates Happy Trails sells for the KLR650. If you have a different skid plate, then look to see if there is an air space where your skid plate meets the foot peg bracket. If there is, then your skid plate will work with our centerstand.
SW-Motech Note: SW-Motech crash bars can work with our centerstand - you will need to find some M8x35 (12.9 hardened) bolts with a 1.25 thread pitch. Some customers have drilled and tapped the peg mount bolts to 10 mm from 8mm to address any concern of the additional stress given to the peg mounting bolts.
Click here for Wiki note: Center stand dragging in turns
All Happy Trails products are crafted in Idaho
Yes, they will all work together.
Yes the centerstand will work with our skid plate and highway peg.
Please check our Installation Instructions HERE
Our Centerstand mount must attach directly to the bike frame.
Give us a Call @ 800-444-8770 and we will get yout aken care of.
If you are in the USA it would be under $10.00 for springs and postage.
Yes you can run the Pivot Pegz, the pegs attach at the clevis of the foot peg so you don't have to unbolt the foot peg.
No it will not
Yes the centerstand will work.
The OEM foot peg bolts.........
The bolts won't be reused the pegs are reused.
We are not making the Lowered centerstand any longer.
The centerstand is the same as the lowered version, the adjustment makes up the difference. The issue we were constantly plagued with was that it would only work with our links customers were using other links and stating the obvious that they had issues.
Yes, The stock gravel deflector is OK with the centerstand.
This center stand works all "E" Model KLR's through the current year.
There should not be any issues using the Raising Links