Aluminum Pannier Kit TETON - BMW F650-F700-F800GS-Twin

With Happy-Trail exclusive Clif-Cut 

This Teton Pannier Kit for your BMW BMW F650GS/F700GS/F800GS-Twin includes everything you need for a great luggage system. The kit includes:

  • Two Teton Panniers with left side Clif-Cut
  • SU Rack System
  • Mounting hardware

Special Price $740.00 Regular Price $925.00
SKU
PANKIT-F650-700-800GS-TWIN-TE

Pannier measurement note: A 3/4" lip makes the opening on all boxes 1-1/2" smaller than box measurement.For further detailed Pannier Info visit our Happy Trails Panniers 101


Pannier kits include: Each and every pannier kit includes the SU Rack and the Puck Mount kit. Additionally, kits include Free pre-mount and Free lid locks. Make your additional selections below.


Powder Coat: In order to provide superior customer service, we now offer our panniers and top boxes finished in Hammertone Black and Aluminum only.


Pre-mount: We will drill the four holes for the pannier puck mount system in Happy Trails' "neutral" mounting position, suitable for solo or two-up riding (rider and passenger).


Matched Key Lid Locks allow you to have a single key for aluminum panniers and/or aluminum tailbox (any number of boxes) as long as they are ordered at the same time. Does not replace cam latches, which provide the dust and water proof seal that makes our boxes famous.See photo.


Bag-It! sale! Add six pannier liner bags for the bundled price of $90 (save $30). Stack one bottom & two mid/upper bags in one pannier, one bottom and two cubes in the other. Packing Tips Video


Cap-It! Our Happy Trail Pannier top bags are perfect for easy access to the things you need close at hand. They mount to the top of your panniers and can be used on any 5", 6" or 7.5" Happy Trails Pannier equipped with footman loops or lid racks.



Add an Inner Tool/Carrier System so you can load the inner space of symmetrical SU racks with the can't-leave-behind essentials, while leaving the panniers back at camp. Here is a link for pictures and further information.


Single Cap-It! Pannier Top Bag straps into SU utility carrier so you can leave panniers at camp and carry tools, tubes on the trail. This bag is not waterproof, and requires a plastic bag inside. Note: If you have a pair of Cap-It Pannier Top Bags you can use one of them. This is the same bag.


Required: Help us to help you... please enter the make, model and year of your bike in the box below:

Make Model

This Teton Pannier Kit for your BMW BMW F650GS/F700GS/F800GS-Twin includes everything you need for a great luggage system. The kit includes:

  • Two Teton Panniers with left side Clif-Cut
  • SU Rack System
  • Mounting hardware

Pannier kit does not include the Tail Plate shown in the photo.

The SU rack has our new Point1 pressed insert design, adding to the ease and functionality you???ve come to expect from our pannier systems. Details HERE.

 

Tim says: The SU Rack is asymmetrical to hug the bike's profile. Measured from center, the right side is 11", the exhaust side is 12.25". The Panniers have the Happy Trails exclusive Clif-Cut on the exhaust side to keep the weight of the load as close to the center of the bike as possible. This creates a  balanced, symmetrical look.

Note: The bike can't run a Clif-Cut on the non-exhaust side as it will interfere with fuel filling.

f700 teton w clif chart


All Happy Trails products are crafted in Boise, Idaho

SU RACK INSTALL INSTRUCTIONS

Write Your Own Review
You're reviewing:Aluminum Pannier Kit TETON - BMW F650-F700-F800GS-Twin

Product Faqs

Ask a Question







Ask a Question


Sort by   
  • What is the volume of each bag in Liters for the 7.5" and 9" widths?
    Question by: Steven Carter on 2017-10-06 00:57:00

    f700 teton w Clif chart

    Answer by: Tim on 2017-10-05 20:57:00
  • I have a 2014 F700GS. I would like to order a 9" Teton pannier system and top plate kit. Do the pre drilled holes allow the top of the panniers to line up flush with the top plate?...or can they be drilled for that configuration? Or is that a bad idea for any other reason?
    Question by: Eric G Foor on 2017-03-24 21:30:00

    The angles are slightly different. This would be a Clif Cut option and unless you are really finicky I think you would be happy with the way it is. There is a good shot on this page of the Clif Cut with the Top Plate

    You can also order the kit not drilled and mount exactly as you want.

    Check out the picture and let me know what you think.

    [email protected]

     

    Answer by: Tim on 2017-03-24 17:30:00
  • Why doesn't the sale price show for in the cart for the Tetons for a BMW 700 GS?
    Question by: Marla C Dale on 2016-03-22 01:49:00

    Error is corrected.

    Answer by: Tim on 2016-03-21 21:49:00
  • Why doesn't the sale price show for in the cart for the Tetons for a BMW 700 GS?
    Question by: Marla C Dale on 2016-03-22 01:23:00

    Error is corrected

    Answer by: Tim on 2016-03-21 21:23:00