Eibach Racing Shock Springs for KLR650 (all years)

More Views

Eibach Racing Shock Springs for KLR650 (all years)

100 % of 100

Eibach Racing Springs
for KLR650




Ship to Store: Pickup Sep 26 - Sep 30 FREE

Ship to Home: Estimated Sep 25 - Sep 27 (lower 48)

The stock shock spring on the KLR650 is aimed at a 155 rider. Many of us left that kind of weight behind in high school! These ERS (Eibach Race Spring-System) allow you to fit a properly weighted spring based on your weight and riding load.

When other springs sag, wear out, or create sketchy handling or a bone-crushing ride, top motorcycle tuners "like top race teams" inevitably turn to Eibach. These springs feature:

  • Precision tolerances; the tightest in the industry
  • Ultra-lightweight, for reduced unsprung mass
  • Maximum deflection in combination with smallest block heights
  • Precision plane-parallel and square end configurations under unloaded and loaded conditions
  • Lowest side loads with load center ideally located relative to spring axis

Exceptional block resistance and durability

Spring is 9" x 2.25".

When you are calculating weights for the chart below here are some tips:

  • Add 10 pounds to your weight for riding gear
  • Add in the total of your luggage and contents for the long trips you will be taking
  • Anything that mounts on the tail rack has more leverage so add about 30% more for weight
  • Don't forget the tank bag and other bags on the bike
  • The stock KLR shock has 5 adjustments so you need to be resetting this for the different weight you have on the bike
  • Check you SAG on each of the settings with you stock spring
  • Some of us are already riding 2 up by ourselves and we don't want to admit it

Please use the following chart as a guide when ordering shock springs:

 Eibach Spring Chart

More Information
Manufacturer SKU 0900.225.xxxx
California Restricted Product: No
Write Your Own Review
You're reviewing:Eibach Racing Shock Springs for KLR650 (all years)
Your Rating

Product Faqs

Ask a Question

Ask a Question

Sort by   
  • Dear Sir,I wonder if you can measure the spring inner\outer diameter and the length. I want to use this spring in a different motorcycle, but unfortunately nobody sells stronger springs for mine. Thank you im advance.David
    Question by: David on 2018-12-31 20:49:00

    59MM ID x 83MM OD +-

    Answer by: Tim on 2018-12-31 15:49:00
  • Do you know the stock spring rate on the new edition KLR (2015+)?
    Question by: Carl on 2018-03-28 02:48:00

    I don't that. Can you tell me what issue you are eperiencing and I can probaly answer your question coming from a different direction.

    Answer by: Tim on 2018-03-27 22:48:00
  • HP,Bike is a 2011 KLR650. I have weighed all my gear and am having trouble picking a spring rate. Most of my riding is done at 236lbs (me plus everyday gear) and seldom fully loaded for trips at 288lbs (me plus camping and long haul gear). Fully loaded trips account for only 10-15pct of my riding. Should I go with the 450# spring and then just adjust the preload screw or go with the 500# for those rarer occasions I load the bike down? Any help is greatly appreciated.
    Question by: Bill Carpenter on 2017-01-07 00:01:00

    I would suggest you go with the 500 # Spring. It is better to be on the heavy side.

    Answer by: Tim on 2017-01-06 19:01:00
  • I have a KLR 650. My weight fully geared plus empty panniers is about 225. I would like to size up my rear spring to carry another rider (160#) and perhaps 30# of luggage. What spring would you recommend? For normal riding (just self and light panniers) I would like to have on the lowest spring tension setting. Thanks!
    Question by: Michael Yacus on 2016-10-12 19:04:00

    You would need the Eibach Spring with a 550 spring rate.

    Answer by: Tim on 2016-10-12 15:04:00
  • I have 2 KLR's and am looking at upgrading the springs. My son and I are going to take the bikes on a month long trip North Western Australia. Roads are full of corrugations - there will be a 500km section of sand riding and the load will max out at about 150kg(330 lb) of rider and gear on each bike.1) What springs do you recommend front and rear.2) What price and shipping can you do for 2 sets of front and backGerard
    Question by: Gerard on 2016-03-22 00:18:00

    The 500 pound spring would well for what you have decribed.

    I would suggest the Progessive Front Springs for your bike.

    When you put the items in the shopping cart you can get a freight quote at that time.

    Answer by: Tim on 2016-03-21 20:18:00
  • What is the recommended rider weight for the different spring rates on the eibach racing springs for the klr 650.
    Question by: justin on 2016-02-06 01:53:00

    Our Chart is temporarily disable we will get it linked back shortly

    Answer by: Tim on 2016-02-05 20:53:00