This is the standard version of the HT KLRE centerstand. See the lowered version here.
The Happy Trails Centerstand reflects two-years of research and development. Our goal was to design & produce a product that would be best in class for the following criteria:
- Ease of installation
- Ease of use - in getting the bike on the stand
- Ground clearance - the most possible
- Adjustable height - one stand for all combinations of tires
- Lightweight (6.25 lb.) and durable
- Replaceable wearing parts
We think we've succeeded on all counts.
Answers to questions you've asked:
The sidestand and centerstand must be deployed in a certain order to avoid interference. When dismounting, set the sidestand first ... next deploy the centerstand. Reverse this order when preparing to ride.
The product works with all skid plates Happy Trails sells for the KLR650. If you have a different skid plate, then look to see if there is an air space where your skid plate meets the foot peg bracket. If there is, then your skid plate will work with our centerstand.
SW-Motech Note: SW-Motech crash bars can work with our centerstand - you will need to find some M8x35 (12.9 hardened) bolts with a 1.25 thread pitch. Some customers have drilled and tapped the peg mount bolts to 10 mm from 8mm to address any concern of the additional stress given to the peg mounting bolts.Click here for Wiki note: Center stand dragging in turns
All Happy Trails products are crafted in Idaho
No Faqs Found !
You may also be interested in the following product(s)
Regular Price: $39.95
Special Price $29.95