Finally a shield that’s tall enough to be effective. These shields pick up where others left off. First we followed the original angle at the bottom and then brought the trailing edge closer to the rider. Next we incorporated a subtle reverse curve that makes a shorter shield stand taller while pushing the air over the rider. The result is a shield that reduces or eliminates the turbulent ram air blast and buffeting effects that’s associated with others. Three sizes & tints to choose from for a shield that suits your riding needs. We also offer a sleek looking sports shield when some extra air is a welcome relief and all shield sizes are designed to be looked over.
- Manufactured from .150 aircraft grade acrylic.
Available in clear, green, light & dark gray tints.
Installation instructions & all hardware included.
Suggested sizing is for most average body builds on stock seats. Riders that are caught in between sizes need to determine torso, posture and neck considerations for best results. It is always better to be on the next shorter size if ordering dark gray (Must see over the top).
17” Sport all riders
22” for riders 5’7” to 5’11”
24” for riders 5’11” to 6'2”
26” for riders 6’3” and over
All shield heights are measured from bottom to top center & all widths measure about seventeen inches wide just below the top (sport shields measure thirteen inches wide). All shield height suggestions below are designed to be mounted at the lowest position for optimum performance & best aesthetics.
Note: No refunds or exchanges on Opaque Black, Light Green and Dark Gray Tints.
ONLY FOR THE 2011 - 2013