Galfer is to brakes as Xerox is to copying...look no further
if you want the best in stainless lines, rotors, and pads. When choosing rotors
consider the following benefits of Galfer Wave®
Laser Cut: To assure perfect flatness and no stress to the material. (Most competitors rotors are stamped and can warp during the manufacturing process).
Made with Galfer’s unique formulation
high carbon 420 stainless steel material: Will improve ever feel and feed back allowing the rider to get a much stronger and progressive brake response than other materials. Each rotor is designed to work under excessive heat loads during long periods of time.
Parallel double disc ground: To assure perfect parallel flatness and thus the most efficient contact surface (friction levels) between pad and rotor.
Self Cleaning and cooling action: The unique design is great for keeping mud or water off the surface friction plate, as well as allowing for fresh air to flow past the brake pad /caliper cooling the brake system as it works.
Unsprung weight: Most are lighter than the stock—they will reduce the overall unsprung weight of the machine.
Always replace brake pads when replacing rotors. Using old or worn pads can cause hot spots or glazing of the rotor; this promotes brake fade and loss of brake.