ROX Part Number: 3R-AV2SE
Elite Anti-Vibration Risers 2" Rise x 7/8" stem clamp x 7/8" or 1-1/8"
Rox Adjustable Risers are
the premier handlebar riser for Adventure Motorcycling, on road and off. Its
pivot puts your bars at your preferred position relieving wrist, elbow and
risers allow you to clamp a 7/8" diameter handlebar or remove the 7/8" reducers
and clamp an 1-1/8" aluminum "fatbar". If you are thinking of going to a fatbar
after you bend your stock set this is the riser to go with.
lock into risers to insure no slippage between components, and have serrated
teeth for maximum gripping power on handlebar.
and use 8mm bolts
Note: Anti-Vibe Risers may interfere with aftermarket large capacity fuel tanks, and some steering stem clamp configurations. Standard Pivoting Risers will not interfere.
Warning: Rox Anti-Vibe Pivoting Risers should not be used with ant-vibe aftermarket stems that have independent handlebar clamps. If stem has a one-piece dog bone style top clamp then it is okay.
These will install directly on the 07 KFX 450 with stock bars, minor re-routing required. Also great for the 07 YFZ 450, longer cables and brake line required. Always check and confirm that your vehicle has adeguate cable and brakeline length before installing any handlebar risers.