Our mount kits make it a cinch to take your panniers on and off your Happy Trails Point1 design SU rack. Note that your SU rack is a Point1 design if it has a pressed insert for the upper mounts.
The kit contains 2 pucks for each pannier (total of 4). The pucks are permanently attached with hex head bolts to the bottom of the panniers, and hold the shear weight of the pannier. The upper two mounts on each pannier are secured via a plastic knob (3/8" bolt) turned into a threaded insert on the SU rack. Large washers on the inside of the pannier spread the load.
MK750.1 mounts cases to Happy-Trail Point1 SU racks
with 3/4" (.750" or 19.05 mm) tubing.
MK625.1 mounts cases to Happy-Trail Point1 SU racks built with 5/8"
(.625" or 15.875 mm) tubing (5/8" tubing applies only to BMW Oilheads: R11xxGS; R1200GS)
Note: Our puck system now employs hex head bolts instead of allen head's because customers reported issues with the head being stripped.
All Happy Trails products are crafted in Boise, Idaho