The new R1200GSW is considered the ultimate do anything, go anywhere machine by many adventure riders. At Happy Trails we are constantly
amazed by where these big bikes can go with a capable rider on board. We
have also seen what happens when the stock skid plate comes in
contact with too many large, unmovable trail hazards.
In the worst case
(since the stock plate is mounted to the engine oil pan) the mounting bolts
punch a hole in the engine causing oil loss ... and an unhappy rider.
In less severe cases, the rubber mounts holding the skid plate to the bottom
of the engine soon separate from each other and you have a skid plate
left on the trail somewhere, or maybe caught in time to zip-tie it
in place until you get to the next BMW dealer.
HTP has designed a custom fit, full length 3/16” skid plate. It is
not mounted to the engine oil pan and does not use failure prone rubber
based mounting spacers.
We mount directly to the frame rails at the rear and
to the most substantial engine mount available at the front of the plate.
Our unique bracket design absorbs the energy from larger hits
before transferring it to the engine case. Happy Trails further
adds strategically placed rubber isolator blocks between the case and skid plate
to enhance impact dissipation as well as adding a noticeable sound dampening
In addition to relocating the
mounting points and using heavy gauge aluminum, our larger and longer skid
plate provides additional protection for the front, sides and back of the
engine and exhaust system compared to the stock plate.
All HTP skid plates are precision cut, bent, and hand-welded at our Boise,
Idaho factory before applying an elegant Silver Vein powder coat
finish. This attractive black/gray hammertone-style finish complements any
GS color scheme and really must be seen to be appreciated.
Unique mounting brackets help prevent engine
case damage and potential “ride-ending” oil loss
HTP original rubber isolation system for
impact dissipation and sound dampening. (See "More Pictures" button on this
Extended protection for the front, sides, and
back of the engine and exhaust system
Adventure proven 3/16” aluminum plate is used
throughout for strength and long term durability
Tough, yet attractive Silver Vein powder coat
finish applied to skid plate and mounting brackets
Dimensions: 18” x 14.5” x 6”
Weight: 9.5 lbs
All Happy Trails Products are designed and crafted in Boise, Idaho