Cee Bailey's Standard Windshield BMW R1200 GS


Fitment for BMW R1200GS 2005 and up.

All new and redesigned with a more pleasing look and the same great performance. These shields are tall enough to be effective. They provide head and torso protection from the ram air blast that's associated with other shields. We also offer a sleek sport shield that creates an effective torso break or for when some extra air is a welcome relief. Four sizes to choose from for a shield that suits your riding needs. Riders seeking the best stability & maximum protection may consider upgrading to our enhanced version just click on the link here. http://www.ceebaileys.com/bmw/1200gsepws.html

  • Manufactured from .150 aircraft grade acrylic
  • Available in clear, green, light & dark gray tints
  • Installation instructions & all hardware included

Size Selection:

Suggested sizing is for most average body builds on stock seats with the shield set in a neutral position (medium). Riders caught in-between sizes need to determine torso & posture for best results. It is always better to be on the next shorter size if ordering dark gray as you must be able to clearly see over the shield.

  • 12" Sport Shield rated (E) for everybody
  • +1" for most riders up to 5'8"
  • +3" for most riders 5'9" to 6'0"
  • +5" for most riders 6'1" to 6'3"

Note: The original BMW shield measures 13" high when measured from a straight line between the lower mounting holes to the top center of the shield. Width measures about 12" wide when measured just below the crown in a straight line from behind the shield. All replacement shields measure about two inches wider just below the crown and three inches at the mid-section.

Note: No refunds or exchanges on Opaque Black, Light Green and Dark Gray Tints.

Select your windshield size and tint:

Superior Strength Clamping Bolts: Clamping bolts are used for adjusting the shields height and the originals have been reported break without warning. Our design is built to last a lifetime with fully threaded brass inserts so upgrade now & you'll be glad you did. Our extra long shaft makes installation and shield adjustment a breeze for any GS or GSA. Riders that are upgrading to the Enhanced brackets, please be advised that the original clamping bolts may be too short & should be replaced.

Headlight Guards: These guards protect your headlight from costly damage. Made of the same .150 acrylic as the shield, they take the impact of every-day road hazards that will crack or break a lens without warning. With new head lights costing hundreds of dollars we think these guards are inexpensive insurance. All guards are secured by 3M Dual Locks that separate the headlight from the guard allowing for easy removal for cleaning.

  • No Cancellations, Refunds or Returns
    This product is a special order item
    and not available for refund or return.

Your Price $140.00
SSL Certificate