Fitment for BMW R1150GS/GSA, 1998-2004. (Conversion kit is required to fit the GS Adventure Euro shield to a Standard 1150 GS)
These replacement shields are a replica that follow the same lines and design as the originals. All shields measure about two inches wider than the originals, then we adjusted the shield angle. This adjustment makes the shields trailing edge go further away from the rider, so don't let the height fool you. This creates a comfortable distance between the rider's helmet and the shield. The result is a shorter shield that stands taller which reduces or eliminates the buffeting effects associated with the original.
- Manufactured from .187 aircraft grade acrylic
Available in clear, green, light & dark gray tints
Installation instructions & all hardware included
Suggested sizing is for most average body builds on stock seats. Riders caught in between sizes need to determine torso, posture, and neck considerations for best results. It is always better to be on the next shorter size if ordering dark gray as you must be able to clearly see over the shield.
18" for most riders 5'6" to 5'8"
20" for most riders 5’9" to 5’11"
22" for most riders 6’0 to 6'3"
OEM Specs: The original BMW shield (# 46637664393) measures 19.5" and about 16" wide.
Note: No refunds or exchanges on Opaque Black, Light Green and Dark Gray Tints.